VEX Robotics

8-32 x 1.500in (38.1mm) standard VEX hex screw High strength stainless steel with no finish Use the 3/32in VEX hex key Supplied inpacks of 50

There's nothing more frustrating than a screw with a stripped head. With VEX Star Drive Screws, this becomes a thing of the past. These star drive screws are able to withstand a greater amount of torque than standard hexagonal VEX screws, allowing builders to truly 'lock down' their mechanisms.

Length 12.7mm (0.5 in.)

T15 star head

Use to bolt metal to other parts

High strength stainless steel

8-32 thread

Supplied in packs of 100

There's nothing more frustrating than a screw with a stripped head. With VEX Star Drive Screws, this becomes a thing of the past.

These star drive screws are able to withstand a greater amount of torque than standard hexagonal VEX screws, allowing builders to truly 'lock down' their mechanisms.

Locking type

Length 6.35mm (0.25 in.)

T15 star head

Use to bolt metal to other parts

High strength stainless steel

8-32 thread

Supplied in packs of 100

8-32 x 0.250in (6.35mm) standard VEX hex screw High strength stainless steel with no finish Use the 3/32in VEX hex key Supplied inpacks of 100

These square shafts have rounded corners which allow them to spin easily in a round hole, while locking into a square hole. 305mm (12in.) shafts Work with motors, wheels, gears, and bearings Cut to length to make your own custom shafts Supplied in apack of 4

Larger 6.35mm (¼in.) shafts are tougher, stronger, and ready for even the most stressful robotic applications.

These thicker shafts are more resistant to both twisting and bending fatigue, meaning that you should have no fear of designing high-torque gearboxes or high-impact drivetrains. Works with all VEX High Strength Gears Works with the 3.25in. Omni Wheel and 3.25in. Traction Wheel Length 305mm (12in.) Supplied in apack of 4

High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up to 50 pounds, so make sure to use them on your heavy lifting mechanisms!

Assembling a VEX robot just got easier with our Hex Nut Retainers. With a center hole sized to securely fit a Hex Nut, a #8-32 screw can be tightened without the need for a wrench or pliers. When mounted, they provide multiple points of contact on structural components for stability.

VEX bar with holes on 0.500" increments. Can be cut on 0.500" increments.

Made from cold rolled steel, 0.046" thick, zinc plated.

(8) Bar 1x25

VEX C-Channel has holes on 0.500" increments. This structural member';s excellent strength and bending resistance is perfect for building robust robots. Multiple sizes available, in two different material types Made from cold rolled steel, or 5052-H32 Aluminum Each channel is segmented into cuttable 2.5" pieces

VEX C-Channel has holes on 0.500" increments. This structural member';s excellent strength and bending resistance is perfect for building robust robots. Multiple sizes available, in two different material types Made from cold rolled steel, or 5052-H32 Aluminum Each channel is segmented into cuttable 2.5" pieces

VEX C-Channel has holes on 0.500" increments. This structural member';s excellent strength and bending resistance is perfect for building robust robots. Multiple sizes available, in two different material types Made from cold rolled steel, or 5052-H32 Aluminum Each channel is segmented into cuttable 2.5" pieces

Wheels Defense may not always win championships, but being able to move does. Put some power on the floor with our large variety of wheel options available for builders. Omni-Directional or Mecanum Wheels are great for quick, lateral movements. If you need more grip, Traction Wheels offer great pushing ability and are designed for optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition.

Use these extension cables to extend the length of your motor, sensors, and other electronics wires. The 2-Wire Extension Cable Bundle includes: (2) 6" cables (2) 12" cables (1) 24" cable (1) 36" cable

VEX angle without slots, typically used for structural framing. Can be cut on 0.500" increments Made from cold rolled steel, 0.046" thick, zinc plated All items are (4) to a package

VEX angle without slots, typically used for structural framing. Can be cut on 0.500" increments Made from cold rolled steel, 0.046" thick, zinc plated All items are (4) to a package

Use these extension cables to extend the length of your motor, sensors, and other electronics wires

Because that wheel isn't going to drive itself. Give your motors something to turn with VEX EDR Drive Shafts. Want a smoother ride? Use Bearings and Shaft Collars to keep your mechanisms and wheels moving smoothly, and locked into place. Use spacers if certain parts of your robot need to be properly positioned, or you need to add space between metal.

A standoff is used in mechanics and electronics to separate two parts from one another while creating a rigid connection. All VEX Standoffs have 8-32 threads.

Hex size is 0.250in across the flats

Light weight aluminium

All VEX Standoffs have 8-32 threads

Supplied in packs of 4

Gears are one of the primary sources of power transmission in VEX EDR. We offer a variety of both normal and high strength gears, that come in a multitude of shapes and sizes. Start with a simple project like building a gear reduction, and work your way up towards building more complex mechanism such as a differential for a drivetrain. More information on gears and power transmission can be found in theVEX EDR Curriculum. Note:We are currently transitioning our stock of 84T gear packs (276-3438) from Green to Red gears. You are not guaranteed to receive the color shown in the product photos.

Because that wheel isn't going to drive itself. Give your motors something to turn with VEX EDR Drive Shafts. Want a smoother ride? Use Bearings and Shaft Collars to keep your mechanisms and wheels moving smoothly, and locked into place. Use spacers if certain parts of your robot need to be properly positioned, or you need to add space between metal.

Thesechain linksfromVEXcan be combined in any desired lengths to form a chain up to 48 inches. The chain can be used as part of a robotics design project or in a range of other applications. Suitable for use with VEX Sprocket ; Chain Kit (available as VEX 2762166) Includes 140 chain links 20 chain attachment links Every link can act as master link Links 0.25in. wide

VEX U-Channel has holes on 0.500" increments. This structural member’s excellent strength and bending resistance is perfect for building robust robots.

Made from 5052-H32 Aluminum

Segmented into cuttable 2.5" pieces

Lighten the total weight of a robot or mechanism while still keeping it strong. VEX aluminum kits contain the same metal components as standard structural kits (C-Channel, Plates, and Bars), at a fraction of the weight for improved robot performance! Compatible with all VEX Motion and Structure components. Aluminum Structure Kit (275-1097) (1) 25x25x2 Aluminum Chassis Kit (4) 1x2x1x25 Aluminum C-Channels (1) 1x5x1x25 Aluminum C-Channel (2) 5x25 Aluminum Plates (4) 1x25 Aluminum Bars

This 12" battery extension cable allows for greater flexibility in robot design. Now you can design a battery compartment into your robot regardless of where the microcontroller is mounted. Designed for either of the VEX 7.2V Robot Batteries Mounting plate makes a permanent battery fixture easy