CONSUMABLES

High quality A/B grade Oak Veneered MDF panel measuring 600mm x 400mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.
This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

A/B grade Oak Veneered finish.

Veneer thickness approximately 0.5mm.

High quality wood and veneer, for great looking finishes.

MDF core.

Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.

Low formaldehyde emissions.

1 x 4.0mm Oak Veneered MDF, 600mm x 400mm Sheet.

Length: 600mm, Width: 400mm, Height: 4.0mm, Veneer thickness (approximately): 0.5mm

This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings

This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

High-quality Italian Poplar laser plywood sheets (laserply)

Low density for easier laser cutting

Top-quality AB grading meaning fewer knots aiding consistency of laser cutting

PEFC Certified (Programme for the Endorsement of Forest Certification

Interior grade glue

1 x 6mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet

Length: 600mm

Width: 400mm

Height: 6mm

3mm Clear (Cast) Acrylic Sheets measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.

Excellent value for money.

High gloss surface.

Very high light transmission.

Easily laser cut, drilled and thermoformed.

These sheets can be used as an alternative to glass as they have very good mechanical properties.

Length: 600mm.

Width: 400mm.

Thickness: 3mm (nominal).

This 5mm (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias

Excellent value for money.

High gloss surface.

Very high light transmission.

Easily laser cut, drilled and thermoformed.

These sheets can be used as an alternative to glass as they have very good mechanical properties.

Length: 600mm.

Width: 400mm.

Thickness: 5mm (nominal).

Kitronik Laser Compatible Medite Premier MDF sheets are highly versatile, suitable for enclosures and many other applications. Our laser MDF are EU class E1, which means low formaldehyde emissions. It is this low formaldehyde emission that makes this MDF suitable for laser cutting.

The Laser MDF sheets are produced in line with FSC (Forest Stewardship Council) certification standards.

Low formaldehyde emissions

Highly versatile

Produced to Forestry Stewardship Council certification

Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986

1 x 3mm Laser Compatible Medite Premier MDF, 600mm x 400mm sheet

Length: 600mm

Width: 400mm

Height: 3mm

This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings.

This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

High-quality poplar laser plywood sheets (laserply)

Low density for easier laser cutting

Top quality AB grading meaning fewer knots aiding consistency of laser cutting

PEFC Certified (Programme for the Endorsement of Forest Certification)

Interior grade glue

1 x 3mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet

Length: 600mm

Width: 400mm

Height: 3mm

These 3mm laser-compatible white painted MDF sheets, measuring 600mm x 400mm, offer all the same qualities as our standard MDF lines but with a nicer finish. This comes into its own when laser engraving, as there will be a nice contrast between the white finish and the underlying MDF material. One side of these MDF sheets is painted and the other is a standard MDF finish.

These are high-quality MDF sheets with a white paint finish.

Suitable for use with a laser cutter.

When laser engraving, the white paint finish provides a great contrast to the MDF underneath.

Low formaldehyde emissions.

Suitable for use in internal dry conditions

Highly versatile.

1 x 3mm Laser White Painted MDF, 600mm x 400mm sheet.

Length: 600mm.

Width: 400mm.

Height: 3mm.

 

 

 

Please note:

This 3mm Clear (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.

Dimensions:

Length: 600mm

Width: 400mm

Thickness: 3mm (nominal)

Add a touch of class and sophistication to your beverage consumption with these square-shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish square-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal).

Add a touch of class and sophistication to your beverage consumption with these round shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish round-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal

These stylish high quality natural rough-cut Horizontal slate signs look great hanging in a window, on a wall or anywhere else you might care to put up a sign. Not only do they look stylish and sleek, but they are also durable, practical, and will naturally draw the eye wherever they are put. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved, which makes for a unique long-term sign. They can also be written on with chalk for information of a more temporary nature, when done just give them a wipe with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a single unit.

These stylish high-quality natural rough-cut Horizontal slate signs will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Width: 300mm (Nominal).

Length: 120mm (Nominal).

Thickness: 5mm (Nominal).

These Colorado Brown Laserable Faux Leather Savana sheets, measuring 600mm x 300mm, are perfect for expanding the finishing options for any maker. They are a rustic brown colour, two-tone, and have a distressed look that is soft to the touch and very leather-like. This material is suitable for a laser cutter.

As this material can be cut with a laser, it can easily be cut to any size or shape required. It can be used for a wide variety of applications, such as; seating/upholstery or adding a unique and striking finish to a project. It could also be used for labels, keyrings, or tags, as shown in the product photos. The faux leather can then either be sewn, stuck, or pinned into place in much the same way as leather can.

If this material is to be used for seating covers it is going to be susceptible to getting dirty. Any loose dirt can easily be hoovered or gently dusted with a cloth. Care should be taken as excessive abrasion can mar the material. Wet stains should be dealt with immediately, by mopping up any liquid with a lint-free cloth. If further cleaning is required, clean with neutral soap and water using smooth, circular movements. Then, rinse with water.

This material is safe for indoor use as it is fire retardant to contract level Crib5 as standard and also passes the IMO 8 marine fire standard for indoor seating.

Note:

Faux Leather is a man-made product and therefore, repeat patterns may be noticeable within the product.

Colour variations can occur from batch to batch.

If you have any concerns about the suitability of this product, please contact our customer services team who will be happy to help you assess its suitability for your needs.

Features:

Brown Laserable Faux Leather Savana sheets, measuring 600mm x 300mm.

They are a rustic brown colour, two-tone, and have a distressed look that is soft to the touch and very leather-like.

Suitable for a laser cutter.

It can be used for a wide variety of applications, such as; seating/upholstery or adding a unique and striking finish to a project.

Can be gently dusted, hoovered, and cleaned with warm neutral soapy water.

These sheets are compliant with the following; REACH, OEKO-TEX, Crib 5, and IMO Part 8. They are also fire retardant and are rated as resistant to cigarettes and matches.

Flashforge PLA Filament

PLA (Polylactic Acid) filament is a hot selling 3d printer material on almost all filament stores. It has easy accessibility, greater heat resistance, a simple post-production process, and fits almost all 3d designs. Flashforge PLA filament is odor and bubbles-free, compatible with 99% FDM 3D Printers in the market.

RoHS certified

Nozzle temperature requirement: 190-220°C

Build plate temperature requirement: non-essential

Printing speed: 60-90mm/s

Layer height: 0.1~0.2mm

Density: 1.25±0.05g/cm3

Outstanding diameter accuracy +/- 0.02mm

Smoothen filament extrusion

Ultra-pure grade material & strict quality control standards to guarantee print quality

Minimal filament warping, curling, shrinkage, and bubbles during 3d printing process

Permits longer storage time without any compromise on filament quality

The Ultimaker PLA (polylactic acid) filament is the ultimate solution for a no-hassle 3D printing. It is reliable and delivers good surface quality. The PLA is made from organic and renewable sources and has various eye-catching colours and compounds to achieve the right filament for your print. Ultimaker PLA is made from starch, a biodegradable and odourless filament that is ideal for 3D models and prototyping at home. This product is 750g in weight.

Allows the creation of high-resolution parts

Easy to work with at high print speeds

Good surface quality

Good tensile strength

Great for lost casting methods to create metal parts

Ideal for models and prototypes that require aesthetic detail

It has a 2.85mm diameter

Prints in dual extrusion with PVA on Ultimaker 3

User-friendly for both home and office environments

Note: PLA is the preferred choice for primary and secondary schools because it is safe and easy to print

Dremel Nylon filament has been specifically engineered for optimal printing with your Dremel 3D Printer 3D45.

RFID filament recognition tag - Printer automatically adjusts settings by reading the filament RFID tag

Provides a very smooth surface for strong and flexible prints with heavy wear resistance

SG Education's recommendation for Filament Suitable for use with 3D printer taking 1.75 filamant (not Ultimaker 3D printers)

3Dom PLA 1.75 is known for its ease of use, high printing speed, and excellent print quality, producing smooth and detailed prints with vibrant colors. The material is also eco-friendly and safe to use, emitting no harmful fumes or odors during the printing process. The 3Dom PLA 1.75 filament is a popular choice among hobbyists, educators, and professionals who seek high-quality and sustainable materials for their 3D printing projects

Please note PLA is hydroscopic, so please store in dry covered area. The filament has a diameter of 1.75mm, making it compatible with most 3D printers that use this size of filament.

SG Education's recommendation for Filament Suitable for use with only Ultimaker 3D Printers.

Printing Temperature : 185 - 215°C

Bed Temperature : 0 - 60°C

2.85mm

Please note PLA is hydroscopic, so please store in dry covered area.

The filament is made of ABS, a dimensionally stable and weather-resistant material. Their pressure pieces thus become particularly impact and impact-resistant. In addition, the ABS filament is ideal for three-dimensional printing in the air, as this material cools down faster and becomes less warpage as a result. The ABS filament is also not transparent.

Specially suitable for 3Doodler-3D printing pen

Flexible

Fast solidification, making 3D drawing easier

Dremel Eco-ABS Filament 1.75 Black is a type of 3D printing filament that is designed for use with Dremel DigiLab 3D printers. The filament is made from a blend of ABS (Acrylonitrile Butadiene Styrene) and other eco-friendly materials, which makes it a more sustainable option than traditional ABS filaments. This filament has a diameter of 1.75mm, making it compatible with a wide range of 3D printers.

The black color of the filament is perfect for producing models that require a sleek and professional appearance. Additionally, the filament is easy to print with and produces high-quality prints with excellent layer adhesion and low warping. This makes it an ideal choice for producing functional parts and prototypes that require strength and durability, such as automotive or mechanical components. Overall, Dremel Eco-ABS Filament 1.75 Black is a great choice for anyone looking for a more sustainable and eco-friendly option for producing high-quality 3D prints in a sleek black color.

Dremel Eco-ABS Filament 1.75 White is a type of 3D printing filament that is designed for use with various types of 3D printers. The filament is made from a blend of ABS (Acrylonitrile Butadiene Styrene) and other eco-friendly materials, which makes it a more sustainable option than traditional ABS filaments. This filament has a diameter of 1.75mm, making it compatible with a wide range of 3D printers.

The white color of the filament is perfect for producing models that require a clean and neutral color tone. Additionally, the filament is easy to print with and produces high-quality prints with excellent layer adhesion and low warping. This makes it an ideal choice for producing functional parts and prototypes that require strength and durability. Overall, Dremel Eco-ABS Filament 1.75 White is a great choice for anyone looking for a more sustainable and eco-friendly option for producing high-quality 3D prints in a neutral white color.