Search
All Categories
Menu Close

Elecfreaks 32 IN 1 micro:bit Wonder Building Kit (Without micro:bit)

Manufacturer: Elecfreaks
Micro:bit Wonder Building Kit focuses on the bricks expansions with 32 projects available in our WIKI, and it gives you more chances to create more projects. Packed with different electronic sensors such as the Line-following sensor, the Sonar:bit and the Water level sensor, they enrich the projects with more challenge and fun.

NOTE: Micro:bit is not included

GRAPHICAL PROGRAM- Easy to Start even for Beginners
CASE RICH- The 32 projects are not all possibilities, you may create more projects with your imagination.
SEND WITH FUN SENSORS - (the line-tracking sensor, sonar:bit, and water level sensor)
Wukong EXPANSION BOARD- Small volume with sufficient energy
COMPATIBLE WITH It has a similar size to micro:bit, and there are four fixed holes for 7x5 bricks on the backside.
SUPPORTS FAST CHARGING- The full charging only needs 20 minutes, and the batteries protect themselves from overcharge or short-circuit
BRIGHT BREATHING LEDs - Cool your projects from the colourful atmosphere LEDs and blue breathing LEDs
SKU: EF08239
Availability: Out of stock
€104.95
i h
Please select the address you want to ship to
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

 

micro:bit Wonder Building Kit

micro:bit Wonder Building Kit

micro:bit Wonder Building Kit

micro:bit Wonder Building Kit

 

KIT SPECIFICATION

ItemParameter
SensorsWater level sensor, line-following sensor, Sonar:bit
BricksOver 400pcs
Controle

micro:bit & Wukong expansion board

CommunicationUSB port
Size250 x 190 x 100mm
Weight1150g
Motor drive2 ways(M1,M2)
Servo drive8 ways(S0~S7)
Projects32 projects are provided

micro:bit Wonder Building Kit

 

Wukong EXPANSION BOARD SPECIFICATION

ItemParameter
Power SystemClick once to start,double-click to close
Battery400mAh polymer lithium
Working Voltage

3.7v~5v

Working Temp-20°C~60°C
Size40 x 58mm
Weight41.6g
Motor drive2 ways(M1,M2)
Servo drive8 ways(S0~S7)
IO Ports Lead-outP0/P1/P2/P8/P12/P13/P14/P15/IIC
Rainbow LEDLED0/LED1/LED2/LED3
Atmosphere LEDs4 programmable LEDs
baseboardStandard 7 x 5 baseboard

micro:bit Wonder Building Kit

Customers who bought this item also bought
Picture of ElecFreaks Experiment box for Micro:bit (no mincrobit included)

ElecFreaks Experiment box for Micro:bit (no mincrobit included)

EF08200
Experiment microbit box Kit is a multifunction micro box experiment equipment that is based on professional experimental equipment and the actual physics learning situation. You will learn how to use the science lab kits to programmatically control physical circuits.

Note: Microbit is not included

Features:
  • Portable design with all components in the box to avoid loosing anything
  • The banana line and the joint are common connection which can be widely used for power, signal detection, mutimeter, lead test and circuit boards maintenance.
  • For this Experiment Box, you'll use banana plug wires to connect different components. These wires are easy to insert and pull out yet still create stable connections.
  • Meanwhile, using banana plugs lays a foundation for further circuit design.
  • €59.95
    i h
    Picture of 600mm x 400mm Sheet 3mm Poplar Laser Plywood

    600mm x 400mm Sheet 3mm Poplar Laser Plywood

    KI 3209
    This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings.

    This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

  • High-quality poplar laser plywood sheets (laserply)
  • Low density for easier laser cutting
  • Top quality AB grading meaning fewer knots aiding consistency of laser cutting
  • PEFC Certified (Programme for the Endorsement of Forest Certification)
  • Interior grade glue
  • 1 x 3mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet
  • Length: 600mm
  • Width: 400mm
  • Height: 3mm
  • €7.95
    i h
    Picture of ElecFreaks Micro:bit Smart Cutebot (without micro:bit)

    ElecFreaks Micro:bit Smart Cutebot (without micro:bit)

    EF08209
    Micro bit Bot Cutebot is a small programmable micro bit Bot designed for educational purposes, especially for teaching programming and robotics to children. The micro bit Bot Cutebot is based on the Micro-Bit microcontroller, a small, low-cost computer designed for educational use.

    The ELECFREAKS Smart Cutebot microbit Robot Kit is a rear-drive smart car driven by dual high-speed motors. There is much onboard equipment on the Cutebot including an ultrasonic sensor and distance sensor, two RGB LED headlights and clearance lamps on the bottom, two line-tracking probes, and an active buzzer as the horn. It has rich graphical programming for Cutebot microbit Robot Kit, allowing kids to learn programming from the simplest to the more complex.

    NOTE: Micro:bit is not included

    SMALL & CUTE Exclusive silk-screen design, smooth and burr-free edges, eco-friendly and safe materials, and playful and cute shapes make up our Cutebot microbit Robot Kit. Start using Cutebot directly after receiving it, no need for secondary installation.
    HIGH PERFORMANCE & EXPLOSIVE POWERAlthough the ELECFREAKS Smart Cutebot microbit Robot Kit’s body is relatively small and cute, it has powerful explosive power and can be used to participate in robot fighting competitions.
    RICH EXPANSION ACCESSORIES It can be connected with other accessory packs, such as ELECFREAKS Cutebot Lithium Battery Pack, ELECFREAKS Mechanical Catch, ELECFREAKS Smart AI Lens Kit, and ELECFREAKS Interactive Coding Accessories Pack, and other sensors, such as ELECFREAKS PlanetX OLED, ELECFREAKS PlanetX 8x16 Matrix Sensor, and octopus sensor, etc.
    RICH ONBOARD RESOURCES Cutebot contains rich onboard functions, such as ultrasonic, RGB rainbow light, RGB chassis light, buzzer, infrared receiver, line-hunting sensor, and gimbal wheel
    FULLY ENCLOSED MOTOR Cutebot adopts a fully enclosed motor, which will not be damaged due to dust entering.
    SUPPORT MULTIPLE PROGRAMMING Support Makecode, Python, JavaScript, and C++ programming. You can use the ELECFREAKS Smart Cutebot microbit Robot Kit to learn four different programming styles.
    MULTIPLE REMOTE CONTROL MODES You can use Bluetooth, infrared remote control & Joystick:bit control the car to drive.
    €37.95
    i h
    Picture of Kitronik Jumper Wires 20cm Male / Female 40 Pack

    Kitronik Jumper Wires 20cm Male / Female 40 Pack

    KI 4128-40
    These are 20cm long jumpers with male connectors on one end and female on the other. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header.

  • Male to Female connectors
  • Pack of 40 x M/F Jumpers (four of each colour)
  • Length: 20cm (approx)
  • €3.95
    i h