ELECTRONIC ACCESSORIES

This heavy duty PP3 battery clip lead has a hard case making it extremely durable. It also features pre-tinned colour coded 150mm flying leads, making for easy integration into your projects. This clip lead can easily be soldered directly to a board or connected to your project via terminal blocks.

Features:

Heavy duty construction.

150mm colour coded pre-tinned flying leads.

It features a standard PP3 connector.

The leads are suitable for soldered connections.

The leads are suitable for terminal block connections.

Contains:

1 x heavy duty PP3 battery clip with 150mm colour coded flying leads.

Dimensions:

Leads: 150mm

This silicone tube is for use with the 3V Vertical Submersible Water Pump. It can either be used to replace the existing tubing or if you require additional tubing. The tube has an outside diameter of 9.4mm and an inside diameter of 6.4, providing a water-tight fit when used with the 3V Vertical Submersible Water Pump.

The tubing can be easily cut with scissors to your exact requirements and any excess can be coiled and stored until needed. The tubing is made from silicone, will not leak unless punctured, and is resistant to abrasion.

Features:

For use with the 3V Vertical Submersible Water Pump.

The tubing can be easily cut with scissors.

Made from silicone.

It will not leak unless punctured.

Abrasion resistant.

Contents:

Silicone tube for use with water pumps.

Dimensions:

Length: 5m.

Inside Diameter: 6.4mm.

Outside Diameter: 9.4mm.

1/0.6mm Solid Core tinned copper connecting wire supplied in 10-metre lengths. RoHS compliant and CE approved.

Features:

Solid core tinned copper wire.

Dimensions:

Outer Diameter: 1.2mm nominal.

Wire diameter: 0.6mm.

Length: 10m.

The RGB LED Strip is a board designed for low power lighting applications, such as mood lamps, edge-lit signs, or accent lights. Its discreet size and straightforward layout make it perfect for creating custom lighting enclosures. The board has a micro USB power connector and has been designed so that power requirements are within the supply rating of a computer USB port (under 100mA). This means you can power it conveniently from a computer/laptop or a suitable power supply.

The PCB is approximately 80mm long and 8mm wide, featuring a single M3 mounting hole and flat underside allowing for easy securing within custom enclosures. The USB connector projects approximately 2mm from the end of the PCB. The end mounted switch is used to step between lighting patterns and turn off the LEDs. A remote switch can be connected in parallel with the PCB switch, via the pads provided, to allow remote mounting within an enclosure. The remote switch should be momentary, normally open. The use of a non-momentary switch may result in unpredictable operation.

The 5 full-colour RGB LEDs are mounted on the boards centre line and are driven by a small onboard chip which is pre-programmed to deliver 4 patterns, selected by pressing the button to step through them:

A great option for producing custom enclosures.

A rainbow fade that slowly fades through different colours.

Pressing the button will stop the fade on the current colour.

Pressing again will start a brightness fade (up and down) centred around the current colour.

Another press changes to an RGB chasing pattern.

A further press turns off the LEDs.

Pressing the button once more will bring the sequence back to the first rainbow fade pattern.

Features:

A low power lighting solution ideal for creating custom enclosures for the desktop.

Featuring 5 full-colour RGB LEDs with 4 different user-selectable lighting patterns.

Advance through patterns with end mounted tactile button.

Add your own momentary switch in parallel for remote mounting on your projects.

The board is approx. 80mm long and 8mm wide.

There is a single M3 mounting hole and the underside of the board is completely flat, allowing for technically simple enclosure designs.

Power the board via the end mounted USB connector.

Forward current is typically 60mA at 5V, peak < 90mA.

Dimensions:

Length: 80mm.

Width: 8mm.

Max Height: 5mm.

Mounting Hole: M3.

This wheel is designed to 'push fit' on to our matching geared hobby motor. They have a solid plastic wheel rim and rubber tread tyre. They are perfect for creating your own buggy design.

Features:

Solid plastic wheel rim.

Rubber tread tyre.

Compatible with our geared hobby motor.

Contents:

1 x Wheel for Geared Hobby Motor.

Dimensions:

Overall diameter: 68mm.

Wheel diameter: 51.8mm.

Tyre width: 27mm (30mm including push fit connector).

Shaft outside diameter: 13.8mm.

Width of mounting hole: 3.66mm.

Length of mounting hole: 5.3mm.

RoHS Compliant square, 36-way single-row pin, with 2.54mm spacing. They are suitable for our Kitronik Breakout Boards, as well as for programming applications, wire-wrapping, and connector applications.

The pin headers are compatible with other PCB interconnection systems that use jumper links. This strip can easily be cut down to any length required.

Features:

Insulator material: Glass filled polyester UL94VO.

Contact material: Copper alloy, Gold plated.

Contact rating: 3A.

Contents:

1 x Straight single row PCB pin headers, 2.54mm, 36-way.

Industry standard 20-pole ribbon cable connector which mates with our box and latch headers. The multi-socket connection device forms an electrical connection with flat ribbon cable and is supplied complete with cable strain relief.

Provides a quick and simple interconnection system

With short polarising bump

Gold-plated brass contacts

Designed for use with ribbon cable

UL Approved.

Pitch

Standard Diffused LED 3mm single - choice of colours

Red (KI 3501) 3mm standard diffused LEDs have a forward voltage drop of 2.1V and at 20mA output 275mCd. They fit neatly into a 3mm holder and have a 60° viewing angle.

Green (KI 3502 ) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 35mCd.

Yellow (KI 3503) 3mm standard diffused LED with a viewing angle of 60°. Luminous intensity 125mCd.

White (KI 3564) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 700mCd.

Blue (KI 3565) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 500mCd.

Compatible with:

Raspberry Pi Pico

Micro:Bit

Chose from Red, Green and Orange 5mm standard diffused LED with a viewing angle of 60 degrees.

Forward voltage drop: 2.1 V

Viewing angle: 60 degrees

Max forward current: 25 mA

Luminous intensity: 275 mCd (@20mA)

Lens types: Diffused

Compatible with:

Raspberry Pi Pico

Micro:Bit

Add obstacle detection to your robotics, electronics, or Arduino project. This module has been specially selected to work on the voltage range typically found with the Arduino range of products. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit.

There are only four pins that you need to worry about on the HC-SR04: VCC, Trig, Echo and GND. VCC and GND are for power and Trig, Echo and GND are for your signal. GND is in with the signal set since it's needed for a baseline. You can easily add this to your project and even use with the microbit if you use a separate 5V power supply.

Features:

Add obstacle detection to your robotics, electronics, or Arduino project.

It can also be added to micro:bit projects provided a separate power supply is used.

It provides 2cm to 400cm of non-contact measurement functionality

It has ranging accuracy that can reach 3mm.

Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit.

The pins are; VCC, Trig, Echo and GND

Dimensions:

Length: 45mm.

Width: 20mm.

Max height: 15mm.

Pin Pitch: 2.54mm