VEX V5

Now you can build mechanisms capable of achieving even higher torque or speed than before with these VEX High Strength Gears.

60 teeth
Double-thick face width and ribbing provide added strength
Gears can be bolted together for added strength
Compatible with the VEX High Strength Gear Kit or any VEX spur gear
Metal square hole inserts prevent axle holes from stripping
Build gearboxes that resist high shock-loads
Supplied in packs of 8
Includes 16x square powdered metal inserts and 16x free-spinning acetal inserts

Please note: Shafts not included

A pack of 5 T15 star drive screwdrivers for use with VEX star drive 8-32 screws. Star drive screws are able to withstand a greater amount of torque than standard hexagonal headed VEX screws, allowing builders to truly 'lock down' their mechanisms.

For use with VEX star drive 8-32 screws
Greater torque transmission for improved tightening
Supplied in a pack of 5

The V5 Rotation Sensor measures shaft rotational position, total rotations and rotation speed. The rotational position is measured from 0° to 360° with a 0.088 accuracy. The angle is determined absolutely and is not lost when the robot is powered off. The zero position can be set on the dashboard or by code. Rotations is the number of revolutions forward or reverse, and can be reset to zero as needed. Rotation is not stored and restarts at the current angle on each program execution. Shaft speed is measured in degrees per second.

This sensor is compatible with 1/8” and 1/4” standard VEX shafts.

High Strength Shaft Collars are designed to fit onto High Strength Shafts. This clamping-style collar uses standard hex and star drive screws and nuts to maintain a tight lock without scratching or damaging the shaft.

Designed specifically for VEX 0.25" High Strength Shafts
Standard VEX screws use a 3/32" allen key
Clamping collar is easily adjustable without damaging shaft

Shaft Collars lock to drive shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a hex or star drive set screw. For use with VEX 0.125" shafts.

Spacers are used to create a space between two objects, often to properly position them.

This variety pack includes:
10 x 3/8" OD x #8 Nylon Spacer, 0.125"
10 x 3/8" OD x #8 Nylon Spacer, 0.250"
10 x 3/8" OD x #8 Nylon Spacer, 0.375"
10 x 3/8" OD x #8 Nylon Spacer, 0.500"

V5 Smart Cables allow robot components such as motors and sensors to communicate with the Robot Brain.

Assembling a VEX robot just got easier with our Hex Nut Retainers. With a center hole sized to securely fit a Hex Nut, a #8-32 screw can be tightened without the need for a wrench or pliers.

When mounted, they provide multiple points of contact on structural components for stability.

Assembling a VEX robot just got easier with our Hex Nut Retainers. With a center hole sized to securely fit a Hex Nut, a #8-32 screw can be tightened without the need for a wrench or pliers.

When mounted, they provide multiple points of contact on structural components for stability.

Lighten the total weight of a robot or mechanism while still keeping it strong. VEX aluminum kits contain the same metal components as standard structural kits (C-Channel, Plates, and Bars), at a fraction of the weight for improved robot performance! Compatible with all VEX Motion and Structure components.

Spare game element for use in VRC Change Up.

These tiles were specifically designed to prevent Electrostatic Buildup. In our testing, Anti-Static Tiles consistently showed little to no static buildup at all! These tiles are also reversible, essentially doubling their lifetime, and allowing for much quicker field assembly.

It should be noted that these Anti-Static tiles will NOT interlock with pre-existing Foam Tiles, but otherwise are practically identical. They are functionally equivalent, and any minor differences that do exist (color, thickness, Coefficient of Friction, etc.) are extremely negligible, and should not impact robot-field interaction.

These tiles were specifically designed to prevent Electrostatic Buildup. In our testing, Anti-Static Tiles consistently showed little to no static buildup at all! These tiles are also reversible, essentially doubling their lifetime, and allowing for much quicker field assembly.

It should be noted that these Anti-Static tiles will NOT interlock with pre-existing Foam Tiles, but otherwise are practically identical. They are functionally equivalent, and any minor differences that do exist (color, thickness, Coefficient of Friction, etc.) are extremely negligible, and should not impact robot-field interaction.

This kit contains all 72 Rings needed for a Full VRC Tipping Point field.

The necessary field elements for a VRC Tipping Point field.

Kit includes:
1 x Red Platform Assembly
1 x Blue Platform Assembly
Field Assembly Hardware
White Electrical Tape
Red Tape
Blue Tape

The necessary field elements for a VRC Tipping Point field.

Kit includes:
2 x Blue Mobile Goal Assemblies
2 x Red Mobile Goal Assemblies
3 x Neutral Mobile Goal Assemblies

These ball bearings are compatible with VEX High Strength Shafts. Unlike traditional Bearing Flats, Ball Bearings achieve a lower rotational friction through the use of rolling balls that are built into the Bearing. Great for high speed mechanisms, such as shooters and intakes!

Kit contents:
11 x .302" (1/4" ThunderSquare) ID x 0.875" OD x 0.280" WD (Flanged Bearings)
11 x High Strength Bearing Blocks
11 x High Strength Bearing Block Square Inserts
11 x High Strength Bearing Block #8 Inserts

VEXpro VersaHubs provide frustration-free torque transfer between wheels, gears, sprockets, and shafts. Got a 1/2" Hex that you need to put a plate sprocket on? No problem. Need to mount a 64-tooth gear to your Mecanum Wheel? We can do that. Whatever your need, these hubs will help you integrate everything together seamlessly.

Most of the wheels and sprockets that teams typically use (including the previous generation of VEXpro wheels) don't take piloting into account. We wanted to make sure that everything pilots correctly... every time. Wheels, hubs, gears, sprockets… they all work together.

VersaHubs include the innovative VersaKey mounting system -- VersaKeys transfer torque between coaxial items, and also ensure everything is piloted correctly.

This Bumper Switch requires a lower spring force than the pre-existing Bumper Switch. Great for low force applications!
Provides feedback to the brain as events "happen"
Low force switch can detect light touch
Use to detect walls or limit an arms motion

A standoff is used in mechanics and electronics to separate two parts from one another while creating a rigid connection. All VEX Standoffs have 8-32 threads.
Hex size is 0.250" across the flats.
Light weight aluminum.
Various lengths available.