VEX Robotics

The Corner Beam Pack contains an assortment of Corner Beams, useful for givingVEX IQ Structure more rigidity. (8) 1x1 Left Corner Beam (8) 1x1 Right Corner Beam (8) 2x1 Left Corner Beam (8) 2x1 Right Corner Beam (8) 2x2 Left Corner Beam (8) 2x2 Right Corner Beam (8) 2x1 Extended Left Corner Beam (8) 2x1 Extended Right Corner Beam (8) 2x2 Extended Left Corner Beam (8) 2x2 Extended Right Corner Beam

Compatible withproducts and accessories. Take your competition field on the go! This carrying case has enough space to fit one third of a VEX IQ Challenge field, allowing for quick and easy transportation. Holds (1) VEX IQ Challenge Half Field (228-3051) [not included] (16) 12" x 12" Square Tile with Rubber Feet (10) 12" Straight Wall Section (2) 12" Outside Corner Wall Section

The official VEX IQ Challenge Field Perimeter ; Tile kits are available as a full field, half field, and individually! Practice on the same surface you will be competing on! The field's snap-together construction allows for assembly in minutes. Half Field Kit (228-3051) (16) 12" x 12" Square Tile with Rubber Feet (10) 12" Straight Wall Section (2) 12" Outside Corner Wall Section

This kit contains rack gears, worm gears, linear slide brackets and VEX IQ gears in assorted tooth counts and sizes! (10) 12 Tooth Gear (10) 36 Tooth Gear (6) 60 Tooth Gear (4) 36 Tooth Crown Gear (8) Rack Gear (4) Linear Slider (2) Worm Gear (6) Worm Gear Bracket

VEX IQ 1x4 Beams with magnets attached at one end. Use Magnetic Beams to teach students how magnets work by comparing how they interact with ferrous metals (or other Magnetic Beams) vs non-magnetic items. Attach them to VEX IQ robots to create new object manipulation tools. Contains one North and one South Pole Responds to any ferrous metal or standard magnet Color-coded for easy sorting

The Robot Battery Charger quickly recharges your robot battery

Charges the Robot Brain's battery

Recharges in 2-3 hours

Convenient desktop cradle design

International voltage and frequency compatibility

VEX Square Drive Shaftshave rounded corners which allow them to easily spin in a round hole, while locking into a square hole. Insert these into a motor to power all of your applications. Use the 12" to make your own custom length shafts Works with motors, wheels, gears, and bearings Kit Contents: (4) 1" Shafts (8) 2" Shafts (8) 3" Shafts (4) 4" Shafts Material Type: Zinc Plated Steel Compatible with all VEX Motion Products

Smart Cable (6-pack) 228-2780 A pack of (6) Smart Cables for VEX IQ Smart Motors and Sensors. (2) 200mm Smart Cable (2) 300mm Smart Cable (1) 400mm Smart Cable (1) 600mm Smart Cable Compatible with: VEX IQ Robot Brain VEX IQ Smart Motors VEX IQ Sensors

The Tether Cable connects the Robot Brain to the Controller Allows for wired operation of the robot instead of wireless Charges the Controller from the robot Allows the Controller to be re-calibrated via the Brain's LCD Allows firmware updates to the Controller from a Computer

The Touch LED outputs colour and inputs touch Smart sensor with internal processor and Red, Green, Blue LEDs Glows in up to 16 million colour variations Constant on, off, or blink at any desired rate Touch sensor for student interaction with robot and software Supports event programming to simplify software

Four different size tyre diameters and two different size wheel hubs. Tyre size is printed on tyres for easy reference. (6) Small Wheel Hub (4) Large Wheel Hub (4) 20mm Diameter Pulleys (4) 100mm Travel Rubber Tire (4) 160mm Travel Rubber Tire (4) 200mm Travel Rubber Tire (4) 250mm Travel Rubber Tire 6x Small Wheel Hub 4x Large Wheel Hub 4x 100mm Travel Rubber Tyre 4x 160mm Travel Rubber Tyre 4x 200mm Travel Rubber Tyre (4) 250mm Travel Rubber Tyre

VEX Synthetic Rubber Bands have dozens of uses on a robot. Their spring-like properties make them perfect for latches, triggers, and return mechanisms. Size:3" x 1/8" (76mm x 3mm)

VEX Synthetic Rubber Bands have dozens of uses on a robot. Their spring-like properties make them perfect for latches, triggers, and return mechanisms. 3.5" x 1/4"(89mm x 6mm) Thickness: 1/32"(0.8 mm)

The Linear Motion Kit provides a method for VEX builders to create linear mechanisms. Utilize the low friction slide rails for your own mechanisms or combine them with included Rack Brackets and VEX Rack Gears (not included) to build direct driven linear actuators. Each of the plastic slide trucks has self-tapping holes for VEX 8-32 screws which allows for easy assembly. The rails have holes on 0.500" increments. Two rail lengths included - 12" and 17.5" Use with VEX 8-32 hardware (not included) Additional Truck Kit contains (16) spare plastic trucks

The Linear Motion Kit provides a method for VEX builders to create linear mechanisms. Utilize the low friction slide rails for your own mechanisms or combine them with included Rack Brackets and VEX Rack Gears (not included) to build direct driven linear actuators. Each of the plastic slide trucks has self-tapping holes for VEX #8-32 screws which allows for easy assembly.

Rails have holes on 0.500" increments.

(4) 12" Rails included

Use with VEX #8-32 hardware (not included)

Lighten the total weight of a robot or mechanism while still keeping it strong. VEX aluminum kits contain the same metal components as standard structural kits (C-Channel, Plates, and Bars), at a fraction of the weight for improved robot performance! Compatible with all VEX Motion and Structure components.

Long Metal Capped Shafts, now available in their own Add-On Pack. Comes in 6x, 7x, 8x, 9x, 10x, 11x ; 12x pitch lengths. Kit Includes: (2) 6x Pitch Capped Shaft (2) 7x Pitch Capped Shaft (2) 8x Pitch Capped Shaft (2) 9x Pitch Capped Shaft (2) 10x Pitch Capped Shaft (1) 11x Pitch Capped Shaft (1) 12x Pitch Capped Shaft

This kit contains 14 "long length" shafts to enable construction of even larger VEX IQ robots. Transfer motion over long distances with ease. (2) 9x Pitch Shaft (2) 10x Pitch Shaft (2) 11x Pitch Shaft (2) 12x Pitch Shaft (1) 14x Pitch Shaft (1) 16x Pitch Shaft (1) 18x Pitch Shaft (1) 20x Pitch Shaft (1) 22x Pitch Shaft (1) 24x Pitch Shaft

More tools for building the ultimate robot. Additional metal and hardware pieces let you create bigger, cooler, and more complex robots. (1)15x16x2 Steel Chassis (10) Steel Plates ; Bars (6) Steel Gussets (52)Collars,Shafts;Bearings (66)Standoffs;Spacers (259)Screws,Nuts;Washers VEX Metal ; Hardware kit contents includes: Steel Chassis (2) 2x2x15 Steel Chassis Bumpers (4) 2x1x16 Steel Chassis Rails Steel Plates ; Bars (2)5x15 Steel Plates (4)1x25 Steel Bars (4) Slotted 30 hole Steel Angles Steel Gussets (2)Angle Gussets (2)Plus Gussets (2)Pivot Gussets Collars ; Shafts ; Bearings (16)Shaft Collars (4)2" Shafts (4)3" Shafts (2)12" Shafts (16)Flat Bearings (6)Pillow Block Bearings (4)Plastic Lock Plates Standoffs ; Spacers (10)1/2" Standoffs (8)1" Standoffs (4)2" Standoffs (4)3" Standoffs (20)4.6mm Spacers (20)8.0mm Spacers Screws ; Nuts ; Washers (70)#8-32 1/4" Screws (28)#8-32 3/8" Screws (28)#8-32 1/2" Screws (14)#8-32 3/4" Screws (30)Steel Washers (10)Plastic Washers (65)#8-32 Keps Nuts (14)#8-32 Nylock Nuts

Motor Controller 29 276-2193 The VEX Motor Controller 29 uses a standard PWM signal (like that originating from the 3-wire ports on VEX Microcontrollers) to drive a VEX 2-Wire Motor. Note:We recommend using no more more than one (1) 3-Wire extension cable in between the Motor Controller 29 and a VEX Microcontroller. For longer extensions, use 2-Wire extension cables in between the Motor Controller 29 and a VEX 2-Wire motor. Compatible with 3-wire motor ports on all VEX Microcontrollers Inputs Black Wire - Ground Orange Wire - Power White Wire - PWM Signal: 1ms - 2ms will give full reverse to full forward, 1.5ms is neutral Max Battery Voltage:Max battery voltage: 8.5V (with fully charged 7.2V battery) Max Current:Max current: 4 A

The Tool Kit contains all of the tools you will need to build with VEX EDR. The Open End Wrench fits VEX EDR nuts and standoffs, while the Hex Keys fit screws and shaft collars. The Performance Tool Kit contains tools that make working on your VEX EDR robot easier. If you';re using Star Drive screws or couplers, don';t forget to pick up Star Drive Keys or Screwdrivers to go along with them! A pack of 5 sets of 3 different performance tools that make working on your VEX Robot easier. The ball-end hex driver allows you to access screws at difficult angles, simplifying building and repairs. The 3/32 wrenches fit VEX screws and the 5/64 wrenches fit motor screws and shaft collars. Each set of 3 contains: 1x 5/64in. Hex Driver 1x 3/32in. Hex Driver 1x 3/32in. Ball-End Hex Driver Supplied as a grouppack of 5 sets(15 tools in total)

Plastic Shaft Base Pack The Plastic Shaft Base Pack contains various length shafts for different purposes and pitches your design may require. This pack is included in all VEX IQ Starter Kits and Super Kits. (6)1x1 Idler Pin (6)0x2 Idler Pin (2)2x Pitch Plastic Shaft (2)3x Pitch Plastic Shaft (2)4x Pitch Plastic Shaft (2)5x Pitch Plastic Shaft (2)2x Pitch Plastic Motor Shaft (4)3x Pitch Plastic Motor Shaft (2)4x Pitch Plastic Motor Shaft (2)2x Pitch Plastic Capped Shaft (4)3x Pitch Plastic Capped Shaft (2)4x Pitch Plastic Capped Shaft (2)5x Pitch Plastic Capped Shaft Note:The base color for the Plastic Shaft Base Pack (228-3620) is black.

Developed in collaboration with West Coast Products, Flex Wheels are for use with intakes, conveyor systems and shooters.

Flex Wheels are made of a super tough custom blend of silicone rubber - different than any other flexible or compliant wheel used by VRC teams. Both VRC-Compatible wheel diameters are offered in different durometers: the super soft 30A in light gray and the hardest 60A in black. The varying hardnesses can be used to change the traction and compliance of your mechanism.

The Pulley Base Pack contains pulleys of different sizes and assorted rubber belt size, and is included in all VEX IQ Starter Kits and Super Kits. (2) 10mm Pulley (2) 20mm Pulley (2) 30mm Pulley (2) 40mm Pulley (2) 30mm Rubber Belt (2) 40mm Rubber Belt (2) 50mm Rubber Belt (2) 60mm Rubber Belt (2) Tire (100mm Travel) Note:The base colour for the Pulley Base Pack (228-3508) is blue.

Now with a new design! VEX rack gears can be used to turn rotary motion into linear motion. Mount these new racks similar to VEX motors and servos with 6-32 screws Use any VEX spur gear as a pinion to drive these rack gears Stack multiple rack gears end-to-end for longer travel Combine these with a VEX linear slide and Rack Gear Bracket (sold separately) to create a simple linear actuator Length of each section 63.5mm Each section has 19 teeth Material: acetal Supplied inpacks of 16