VEX Robotics

This kit includes pieces specifically recommended by VEX builders toversatility. Contains over 600 pieces of VEX Structural and Motion Components. (1) 25x25x2 Steel Chassis (14) Steel Plates ; Bars (6) Steel Angles (6) Steel C-Channels (12) Steel Gussets (25) Gears ; Rollers (70) Collars ; Shafts ; Bearings (66) Standoffs ; Spacers (408) Screws ; Nuts ; Washers

Great for quickly mounting objects. Wrap the Cinch Strap around the object you want mounted, loop it through the buckle, and then back onto itself for a secure hold using VELCRO® brand hook and loop fastener. The buckle allows the user to "cinch" the strap tight around the application.

Quickly mount an object

Adjustable and reusable

Secure holding circumference approximately 4 to 7 inches

Because that wheel isn't going to drive itself. Give your motors something to turn with VEX EDR Drive Shafts. Want a smoother ride? Use Bearings and Shaft Collars to keep your mechanisms and wheels moving smoothly, and locked into place. Use spacers if certain parts of your robot need to be properly positioned, or you need to add space between metal.

8 ft x 8 ft field perimieter Dividing Walls ; Goals (12) Orange Foam Footballs (24) Green Foam Soccer Balls

The official VEX Robotics Competition Field is setup on a foam surface, with a sheet-metal and polycarbonate perimeter frame. Inside this perimeter, game-specific elements can be added. Metal frame for the VEX Robotics Competition field perimeter Includes ALL parts required for frame assembly (includes polycarbonate) Also Includes two driver-control posts Does NOT include Floor Tiles or Electronics Modular and designed for easy assembly, disassembly, storage Refer to the Border Documentation for more details This kit is made up of: 2751774 Competion Field Beams x 2, 2751173 Competition Fields Brackets x 1 2751175 Competition Field Lexan x 1

Gears are one of the primary sources of power transmission in VEX EDR. We offer a variety of both normal and high strength gears, that come in a multitude of shapes and sizes. Start with a simple project like building a gear reduction, and work your way up towards building more complex mechanism such as a differential for a drivetrain. ThisGear Kitcontains additional gears so you will always have the right combination available to ensure you can achieve the desired balance of torque, speed, and direction. To expand your inventing possibilities, the 60- and 84-tooth gears have extra mounting holes. These mounting holes can be used for attaching metal bars or parts to these gears when using them as part of a turntable system, or other similar designs. This kit contains four sizes of VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84-tooth gears have extra mounting holes for attaching metal bars or parts to these gears when using them as part of a turntable system or similar design. Create robot transmissions, gearboxes, and gear reductions. Vary the speed or torque of robot motion systems. Increase design possibilities for your robots.

High Strength Shaft Hardware functions similarly to standard shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction, and the High Strength Clamping Collar to hold everything in place. VEX EDR High Strength Shafts are actually designed about 1 mm shorter than their respective comprehensive solution 8-32 Standoffs. This means that if you use standoffs to hold together two pieces of metal, the High Strength Shaft can rest on High Strength Shaft Bearings attached to those two pieces without any cutting required.

High Strength Shaft Hardware functions similarly to standard shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction, and the High Strength Clamping Collar to hold everything in place. VEX EDR comprehensive solution High Strength Shafts are actually designed about 1 mm shorter than their respective comprehensive solution 8-32 Standoffs. This means that if you use standoffs to hold together two pieces of metal, the High Strength Shaft can rest on High Strength Shaft Bearings attached to those two pieces without any cutting required. NOTE:1/4" High Strength Shafts can only be used with 1/4" accessories, including: TheHigh Strength Gear Kit(276-2250) The84T High Strength Gear(276-3438) 3.25" Wheelsthat include a removable wheel insert ​ ThisHigh Strength Gear Kitprovides several new gears with features to handle higher loads. Each of these gears has a wider face width; this means each tooth is wider so applied loads will be spread over a larger area. The 12-tooth High Strength Gear is molded out of powdered metal. The 36-tooth and 60-tooth Gears have powdered metal inserts. These metallic components will protect the gear from high loads applied by a VEX axle. High strength gears mate with all VEX spur gears. Double-thick face width provides added tooth strength. Metal Square Hole Inserts prevent axles from "stripping". Use metal pinions for high strength where it counts. Use the round-hole inserts to build free spinning idler gears. Build gearboxes that resist high shock-loads. Bolt Gears together for added strength.

High Strength Shaft Hardware functions similarly to standard shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction, and the High Strength Clamping Collar to hold everything in place. VEX EDR comprehensive solution High Strength Shafts are actually designed about 1 mm shorter than their respective comprehensive solution 8-32 Standoffs. This means that if you use standoffs to hold together two pieces of metal, the High Strength Shaft can rest on High Strength Shaft Bearings attached to those two pieces without any cutting required.

Spacers designed for use on VEX EDR High Strength Shafts. Spacers are often used to properly position objects on a shaft or to reduce friction between rotating objects. Eliminate slop on shafts Add space between metal parts Includes four sizes 30x 1.6mm (1/16in.) 20x 3.175mm (1/8in.) 10x 6.35mm (1/4in.) 10x 12.7mm (1/2in.)

These reinforced chains and sprockets can transmit higher loads over long distances. Use this kit to withstand higher stresses and lift heavier loads or for any application where regular chain just won't cut it. High strength design - up to 22kg 12 sprockets in 5 Sizes 1.3m (54in.) of chain links

This hinge provides a simple pivoting joint with 265 degree movement. Sold in packs of 2. 2.5" long x 1.3" wide. Standard VEX holes.

Intake rollers are specifically designed for ball intake systems. The flexible rubber fingers grip the ball. The fingers also deflect, allowing for ball size variation. Rubber fingers. Hard plastic center with square hole. Rubber fingers (ABS Plastic center with square hole)

Tank tread can be used to easily drive over objects or scoop up objects. Use this kit to create intake mechanisms, tank tread drivetrains and more! (200) Tread / Attachment Link (4) 24 Tooth Sprocket (40) Traction Link (20) Short Intake Flap (20) Medium Intake Flap (20) Long Intake Flap

These Omni-Directional wheels roll forward like normal wheels but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drive train. Diameter approx. 62mm Travel: 200mm (distance covered in 1 revolution) Omni-Directional Wheels roll sideways with very little friction Minimize skidding during turns Made from ABS plastic Rollers are soft rubber-coated ABS

One full Squared Away Field Set requires a Squared Away Game Element Kit 1 (VEX 2286095) and a Squared Away Game Element Kit 2 (VEX 2286356) in order to build a complete VEX IQ Challenge Squared Away field. This kit contains 36orange ballsfor the 2019-20VEX IQChallenge game,Squared Away. The game requires 35 balls so one spare is also included.

The Bumper Switch gives your robot the sense of touch Low force switch can detect light touch Use to detect walls or limit an arms motion Supports event programming to simplify software

Use chains and sprockets for additional reductions and to drive mechanisms. (200) Chain Link (8) 8 Tooth Sprocket (8) 16 Tooth Sprocket (4) 24 Tooth Sprocket (4) 32 Tooth Sprocket (4) 40 Tooth Sprocket The Chain Add-on Pack contains (200) additional chain links for longer chain runs and more complex mechanisms.

Trophies included: (6) VEX IQ Challenge Small Trophy (228-3171) Note: each trophy comes with (8) VEX IQ pins for attaching the Award and Date Plates. Award Plates included: (1) Excellence Award (228-3296) (2) Teamwork Champion Award (228-3178) (1) Robot Skills Champion Award (228-3181) (1) Judges Award (228-3187) (1) Design Award (228-3297) (6) Date Plates

The Colour Sensor detects the colour of objects. Allows your robot to identify the colour of specific objects and improve autonomous behaviour. Measures colours Measures colour hue Measures independent Red, Green, and Blue in 256 levels each Measure ambient light level Supports event programming to simplify software

Compatible with IQ products and accessories. VIQClegal. The Connector Pin Pack is included in all VEX IQ Starter Kits and Super Kits. (120) 1x1 Connector Pin (30) 1x2 Connector Pin (10) 2x2 Connector Pin Note:The base color for the Connector Pin Pack (228-3058) is blue.

VEX IQ Connector Pin Pack (Black)

VEX IQ Connector Pin Pack (Blue)

VEX IQ Connector Pin Pack (White)

Controller Battery 228-2779 Replacement rechargeable battery for the VEX IQ Controller Lithium Ion technology 3.7V 800 mAh