Ultimaker Nylon Black 2.85mm 700g

High quality A/B grade Oak Veneered MDF panel measuring 600mm x 400mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.
This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

A/B grade Oak Veneered finish.

Veneer thickness approximately 0.5mm.

High quality wood and veneer, for great looking finishes.

MDF core.

Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.

Low formaldehyde emissions.

1 x 4.0mm Oak Veneered MDF, 600mm x 400mm Sheet.

Length: 600mm, Width: 400mm, Height: 4.0mm, Veneer thickness (approximately): 0.5mm

This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings

This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

High-quality Italian Poplar laser plywood sheets (laserply)

Low density for easier laser cutting

Top-quality AB grading meaning fewer knots aiding consistency of laser cutting

PEFC Certified (Programme for the Endorsement of Forest Certification

Interior grade glue

1 x 6mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet

Length: 600mm

Width: 400mm

Height: 6mm

3mm Clear (Cast) Acrylic Sheets measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.

Excellent value for money.

High gloss surface.

Very high light transmission.

Easily laser cut, drilled and thermoformed.

These sheets can be used as an alternative to glass as they have very good mechanical properties.

Length: 600mm.

Width: 400mm.

Thickness: 3mm (nominal).

This 5mm (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias

Excellent value for money.

High gloss surface.

Very high light transmission.

Easily laser cut, drilled and thermoformed.

These sheets can be used as an alternative to glass as they have very good mechanical properties.

Length: 600mm.

Width: 400mm.

Thickness: 5mm (nominal).

Kitronik Laser Compatible Medite Premier MDF sheets are highly versatile, suitable for enclosures and many other applications. Our laser MDF are EU class E1, which means low formaldehyde emissions. It is this low formaldehyde emission that makes this MDF suitable for laser cutting.

The Laser MDF sheets are produced in line with FSC (Forest Stewardship Council) certification standards.

Low formaldehyde emissions

Highly versatile

Produced to Forestry Stewardship Council certification

Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986

1 x 3mm Laser Compatible Medite Premier MDF, 600mm x 400mm sheet

Length: 600mm

Width: 400mm

Height: 3mm

This is a high-quality Italian Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings.

This Poplar Plywood has an AB grading which is typically the best grade of plywood available.

High-quality poplar laser plywood sheets (laserply)

Low density for easier laser cutting

Top quality AB grading meaning fewer knots aiding consistency of laser cutting

PEFC Certified (Programme for the Endorsement of Forest Certification)

Interior grade glue

1 x 3mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet

Length: 600mm

Width: 400mm

Height: 3mm

These 3mm laser-compatible white painted MDF sheets, measuring 600mm x 400mm, offer all the same qualities as our standard MDF lines but with a nicer finish. This comes into its own when laser engraving, as there will be a nice contrast between the white finish and the underlying MDF material. One side of these MDF sheets is painted and the other is a standard MDF finish.

These are high-quality MDF sheets with a white paint finish.

Suitable for use with a laser cutter.

When laser engraving, the white paint finish provides a great contrast to the MDF underneath.

Low formaldehyde emissions.

Suitable for use in internal dry conditions

Highly versatile.

1 x 3mm Laser White Painted MDF, 600mm x 400mm sheet.

Length: 600mm.

Width: 400mm.

Height: 3mm.

 

 

 

Please note:

This 3mm Clear (Cast) Acrylic Sheet measures 600mm x 400mm. The surface of the sheet has a high gloss finish. Clear Acrylic sheets will allow light to pass through clearly, enabling objects to be distinguished through the material with virtually no colour bias.

Dimensions:

Length: 600mm

Width: 400mm

Thickness: 3mm (nominal)

Add a touch of class and sophistication to your beverage consumption with these square-shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish square-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal).

Add a touch of class and sophistication to your beverage consumption with these round shaped slate coasters. Not only do they look stylish and sleek, but they are also durable, practical, and will protect your surfaces from heat and liquids. Although stone/slate cannot be cut with a CO2 laser, they can be laser engraved for that personal touch. They can easily be cleaned with warm water, with a touch of detergent if heavily soiled, and they are as good as new. Supplied as a pack of 4.

These stylish round-shaped coasters will look great in any location.

They are durable, practical, and resistant to scratching and staining.

Protect your tables and surfaces from heat/liquid damage.

Personalise them with CO2 laser engraving, a coat of lacquer will help improve the contrast.

They can easily be wiped clean with warm water, or warm water mixed with a small amount of mild detergent.

The perfect gift for someone special!

If they fade over time they can easily be brought back to life with a little olive oil.

An even coat of lacquer can have a dramatic positive effect on their look.

Length: 100mm (Nominal).

Width: 100mm (Nominal).

Thickness: 5mm (Nominal