Ultimaker

Enjoy greater flexibility with a universal set of five Ultimaker 2+ nozzles.

The pack includes a 0.25 mm and two 0.4 mm nozzles for a higher level of detail and a 0.6 mm and 0.8 mm nozzle for faster prints.

This is the Ultimaker 2 integrated nozzle + heater block for 3mm filament. It is not for Ultimaker 2 Plus

Ultimaker Spare Part - Bowden Tube

The Bowden tube, 67cm long. Made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes a Clamp Clip and a Tube Coupling Collet. This part is compatible with the complete Ultimaker Original and Ultimaker 2.

The Heater Cartridge for Ultimaker 2 is a replacement part for the Ultimaker 2 3D printer. The cartridge is responsible for heating the printer's nozzle to the correct temperature, enabling the printer to melt and extrude the filament accurately. This heater cartridge is made from high-quality materials and is designed to be easy to install.

It has a power rating of 24 volts and a maximum power output of 35 watts, providing the necessary heat for printing various types of filaments. The Heater Cartridge for Ultimaker 2 is a reliable and essential component for anyone looking to keep their Ultimaker 2 printer in good working condition.

The Ultimaker ABS (acrylonitrile butadiene styrene) filament is used by an array of industries worldwide because ABS is known for its exceptional mechanical properties. ABS is specifically formulated to minimise warping and ensure consistent interlayer adhesion. It has various eye-catching colours and compounds so you get the right filament for your print. And rest assured, our filaments have been endlessly tested to ensure that they are up to the job. 

Achieve better aesthetics compared to other ABS filaments

Excellent interlayer adhesion, especially when using the front door add-on

Excellent mechanical properties

Formulated for an easy 3D printing experience with minimal warping and good bed adhesion

Great for exceptionally strong prototypes or end-use parts

It has a 2.85mm diameter

Withstands temperatures up to 85 °C

Ultimaker Breakaway filament is a support material for multi-extrusion 3D printing

No sanding or waiting for your support material to dissolve. Simply print and break it away

Ensures a high-quality surface finish on your model

Good adhesion to ABS, Nylon, PLA, Tough PLA, CPE, or CPE+

Longer shelf life and less moisture sensitive compared to water-soluble support material such as PVA

Ideal for use with build materials that could be sensitive to water

Breakaway support is quick to remove and does not need further post-processing for a quality finish

Designed for a hassle-free 3D printing experience

Compatible with ABS, Nylon, PLA, Tough PLA, CPE, and CPE+

The urround / Sound Processor Maker CPE+-filament is very well suited for the production of prototypes and mechanical components. The material has been specially designed for the urround / Sound Processor Maker 3D printer.

It is characterized by, among other things, its strength and smell of neutrality. At the same time, the cura published version provides useful material profiles are available, which can be printed even complex models easily and reliably. Despite the compatibility with the urround / Sound Processor maker devices, CPE+ material is also used by other FDM-printers can be used. The CPE material, the CPE + filament give over a yet higher temperature resistance and impact resistance.

Limit switch BK Short Wire UM2/3/S5 Original and high-quality spare part for Ultimaker.

Ensure uninterrupted printing with a handy set of five 0.4 mm nozzles for the Ultimaker 2+ and 3 series . Simple to replace, they help you achieve higher details or printing speed. Quick and easy to install, they are the top-choice nozzle size for reliable, quality prints.

The Ultimaker PAX-M2085 Nylon filament is a polyamide grade based on PA6/66. It features reduced humidity absorption and longer shelf life compared to other nylon filaments. Able to withstand significant mechanical stress, nylon material is a great choice for 3D printing tools, functional prototypes, and end-use parts. This is 750g in weight and black in colour.

Durable

Good corrosion resistance to alkalis and organic chemicals

High strength-to-weight ratio

Impact and abrasion-resistant

Industrial-grade impact and abrasion resistance

It has a 2.85mm diameter

Low friction coefficient

Prints in dual extrusion with PVA or breakaway

For Ultimaker printers - PETG filament 2.85mm 750g Range

Polyethylene Terephthalate Glycol known as PETG is a water clear material and designed to be very ‘easy to use’ in a range of applications. It is one of the most common polymers used today. It is good for making bottles of water, food packaging and other plastic items.

It is one of the most durable materials for 3d printing that is easy to use. It is a mixture of ABS and PLA characteristics as it is more flexible and durable than PLA and easier to print than ABS.

The Ultimaker PLA (polylactic acid) filament is the ultimate solution for a no-hassle 3D printing. It is reliable and delivers good surface quality. The PLA is made from organic and renewable sources and has various eye-catching colours and compounds to achieve the right filament for your print. Ultimaker PLA is made from starch, a biodegradable and odourless filament that is ideal for 3D models and prototyping at home. This product is 750g in weight.

Allows the creation of high-resolution parts

Easy to work with at high print speeds

Good surface quality

Good tensile strength

Great for lost casting methods to create metal parts

Ideal for models and prototypes that require aesthetic detail

It has a 2.85mm diameter

Prints in dual extrusion with PVA on Ultimaker 3

User-friendly for both home and office environments

Note: PLA is the preferred choice for primary and secondary schools because it is safe and easy to print

Ultimaker print core AA 0.40 for 3D printers Standard print core an excellent baseline for general printing Core feature unique auto nozzle-lifting system ensuring reliable, clean, dual extrusion prints Specifically designed for all primary materials such as PLA, ABS, CPE/PETG and Nylon  

Ultimaker Print Core CC for the Ultimaker S3 and S5 range. The CC print core is designed for use with more abrasive Ultimaker materials, such as composite filaments from the Ultimaker ecosystem. The CC print core has a wear-resistant, hardened steel nozzle

The Ultimaker glass plate is the printing platform of the Ultimaker S5 3D printer.

It provides a smooth and flat surface for printing and distributes the warmth from the heated bed below.

It has thin layer of glue to the glass to ensure good adhesion.

High-quality gloss bottom surface.

Great adhesion

The Ultimaker PVA (polyvinyl alcohol) is a water-soluble support material for multi-extrusion 3D printing.

With good thermal stability, Ultimaker PVA is ideal for printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. Designed for a seamless 3D printing experience, our PVA provides good adhesion to both PLA and Nylon. It has printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. This is 750g in weight and has natural colour.

Biodegradable with no hazardous by-products

Good thermal stability

Great adhesion to both PLA and Nylon

Little moisture sensitivity

Safe dissolution in tap water (no harmful chemicals required)

It has a 2.85mm diameter

The Ultimaker S3 replaced the Ultimaker 3 from April 2020.  It can print an enormous range of materials including composites, engineering plastics and nylon. It is engineered to print continuously, with maximum uptime, reliably. No other Ultimaker 3D printer packs so much capability into such a cost-effective package 3D printing has long been synonymous with fabricating exceptional parts and models – but repeatability has always been a challenge. Not anymore.

Ultimaker has perfected first layer adhesion with the S3, which scans the build plate and corrects any microscopic discrepancies within the Z-height. The result is a perfect first layer for perfect adhesion and stability on the build plate. The S3’s build area is 230 x 190 x 200 mm which is down on the S5, but you have to remember this is a more compact 3D printer. It has an assembled size of 394 x 489 x 637 mm, which is around the same size as a laser jet. In other words, it’ll fit on a computer desk quite comfortably - filament tubes and all.

The S3 benefits from dual extrusion technology with Ultimaker swappable print cores, which enable you to easily switch between abrasive, non-abrasive and low and high-temp materials. The S3 is compatible with the complete Ultimaker material library, including TPU 95A, CPE+, Tough PLA, PVA and Breakaway. You can also print with glass and carbon fibre composites. All you need is the Print Core CC Red and you’ll be able to print up to 10kg of carbon fibre. Overall, the S3 is an outstanding 3D printer. It’s suitable for any application -- industrial or educational

The Ultimaker S5 is built to run continuously and maximize uptime. Its best-in-class technical specifications deliver performance you can rely on.

Designed for your success, the Ultimaker S5 is part of the complete Ultimaker 3D printing solution – one trusted by hundreds of thousands of professionals worldwide.

Large build volume: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)

Assembled Dimensions:   495 x 585 x 780 mm (19.5 x 23 x 30.7 inches)

Compatible with high-strength glass and carbon fiber filament

Down to 20 micron (0.001 inch) layer resolution

Open filament system – print with any 2.85 mm material

4.7-inch touchscreen interface – Winner of iF Design Award 2019

Weight: 20.6 kg (45.4 lbs)

The Ultimaker S5 Air Manager improves the Ultimaker S5 3D printing workflow and efficiency. With a connected Air Manager, the Ultimaker S5 is enhanced with the following features:

UFP filtering The Air Manager encloses the top of Ultimaker S5 and ensures an inside-out airflow. The air passes through an E10 filter whereby Ultrafine Particles (UFPs) get trapped.

Optimized material compatibility The Air Manager will automatically adjust its fan speed to optimize print quality per material.

Physical barrier The enclosed top prevents users from reaching into the machine during operation and ensures particles from the environment do not influence the print result.

This machine is no longer in production & this page serves as a reference only. We recommend the Flashforge Series for a single extrusion alternative https://www.sgeducation.ie/flashforge-adventurer-5m-pro-3d-printer

The UltiMaker 2+ Connect 3D Printer with networking capabilities and a new touchscreen is your reliable first step into a world of easy, remote 3D printing.

Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.

Features and Benefits:

Network connectivity:Via Wi-Fi or Ethernet, print remotely over the cloud with added security

Easy setup: Install the printer in minutes, and benefit from improved ergonomics and assisted bed leveling

Next-gen components: A stiffer build platform and rigorously tested material profiles ensure reliable printing

Touchscreen:For every action, the 2.4” color touchscreen gives you intuitive control and assistance

Easy maintenance:A clean and updated design keeps maintenance needs to around 20 minutes per month

Wide material choice: With our open filament system, you can always find the right material

The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. Use a smaller nozzle to print fine lines for more detail, or use a larger nozzle to print thicker lines to decrease print duration. The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more.

Features and Benefits
Clean them efficiently with cold pulls
Print faster, the plastic flows much easier than in classic nozzles
The 0.4mm is the standard size for a lot of 3D printers
The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Use the 0.25mm brass nozzle to print small detailed prints

Note: This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.

The optional Ultimaker 2+ Connect Air Manager gives you more confidence and setup flexibility. Designed to increase user safety, it removes up to 95% of ultrafine particles and shields users from hot and moving components.

For more air quality peace of mind, the Ultimaker 2+ Connect Air Manager includes a single-speed fan to efficiently pull air through a large EPA filter. This gives you the flexibility to install multiple printers in more locations.

The Ultimaker 2+ Connect Air Manager fully encloses the build chamber for a more stable printing environment and to prevent anyone from touching hot and moving components.

Key features

UFP filtering

Easy setup

Enhanced safety

UltiMaker Black Tough PLA 3D printer filament is a versatile and high-quality material that can be used for a variety of applications. This filament is made of polylactic acid (PLA) that has been modified to increase its strength and durability. UltiMaker Tough PLA is designed to be used with Fused Deposition Modeling (FDM) 3D printers that have a 2.85mm filament diameter. It is known for producing high-quality prints that are both strong and lightweight.

The filament is easy to use and can be printed at a wide range of temperatures, making it a versatile option for a variety of 3D printing applications. UltiMaker Black Tough PLA also has high-temperature resistance and excellent layer bonding. It does not require a heated bed, which simplifies the printing process.

This filament is much stronger than standard PLA filaments, making it an excellent choice for creating functional prototypes and parts that need to withstand high stress or impact. The increased strength of this filament is due to the modifications made to the PLA base material.

UltiMaker Tough PLA is an easy-to-use filament that can be printed at a wide range of temperatures. This makes it a versatile option for a variety of 3D printing applications. The filament does not require a heated bed, which simplifies the printing process. It also has low warping, which helps to ensure that the prints come out smoothly.

The high-temperature resistance makes it an excellent choice for creating parts that need to be able to withstand high temperatures. The high-temperature resistance of this filament is due to the modifications made to the PLA base material. The result is a filament that produces high-quality prints that can withstand high temperatures.

UltiMaker Tough PLA has excellent layer bonding, which helps to ensure that the prints come out smooth and strong. The filament produces prints that are free from delamination or separation of the layers. This is due to the modifications made to the PLA base material, which result in a filament that produces high-quality prints with superior layer bonding.

Ultimaker White TPU 95A (thermoplastic polyurethane) filament a semi-flexible and chemical resistant material with strong layer bonding, well suited to printing parts requiring a blend of plastic and rubber, with some flexible properties.

Ultimaker White TPU 95A filament is 2.85mm in diameter and contains approx. 750g per spool. See compatible Ultimaker 3D printers and materials below.

Ultimaker TPU is an NFC spool.

A new level of 3D printing success!! Ultimaker took everything customers loved about the award-winning UltiMaker S5... And made it even better. The S7 is packed full of our latest technology, making it easier than ever to 3D print high-quality parts.

With Integrated Air Manager, not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door.

Flexible build plate, skip using glue and remove parts effortlessly with the PEI-coated flexible build plate. Its patent-pending design uses 25 magnets and 4 pins for perfect alignment – reducing the time spent using the S7 and increasing productivity.

Inductive build plate sensor, a new inductive print head sensor probes the build plate with less noise and more accuracy. And automatic tilt compensation removes the need for thumbscrew bed calibration. Together, these allow you to start a print and walk away – confident in a perfect first layer.