Powermaster Batteries AAA Alkaline (Pack of 4)

With the micro:bit Go Bundle you have a complete set to get started coding right away. This bundle includes a micro:bit board, micro USB cable, battery holder and 2x AAA batteries.

The BBC micro:bit is a pocket-sized computer that introduces you to how software and hardware work together. It has an LED light display, buttons, sensors and many input/output features that, when programmed, let it interact with you and your world. The new micro:bit V2.2 with sound adds a built-in microphone and speaker, as well as an extra touch input button and a power button.

For more information please see below

Kitronik's Simple Robotics Kit is an easy build, entry-level, introduction to the exciting world of robotics. Step-by-step build and coding instructions are included.

Enter the world of robotics with our Simple Robotics kit and build your own easy build microbit-controlled robot. It has been designed, from the ground up, to be simple to build by even the youngest of fingers. From its one-piece cardboard chassis to its clip lead connections, everything goes together in a way that is as free from frustration as possible.

This robot buggy is the same that is featured in our Lesson in a Box Simple Robotics kit, which is a complete set of electronics and teaching resources to enable successful cross-curricular lessons with minimal teacher effort. This single version allows you to make one at home with the children and enjoy the fun learning potential this kit offers. Designed and tested with direct Teacher assistance, and in the classroom, we know this kit lends itself perfectly to the young roboteer.

The kit of parts is accompanied by a detailed set of instructions that will not only walk you through the assembly but also covers the coding in detail. Even if you aren't confident or technical in nature, you will have no difficulties assembling and using this wonderful kit. Nearly everything you will need is supplied with the kit. All you need to have to hand is; a microbit, a screwdriver, and a pair of scissors. The scissors and the screwdriver are barely used, so if the children are quite young these parts can be done in a flash by an adult. The included cardboard body can be cut, decorated, and modified to suit your own projects, or you could even design your very own chassis, the possibilities are endless.

Coding: The supplied instructions have extremely detailed coding explanations, so much so that the beginner will have no difficulties following along. There are also some more involved examples that are similarly walked through. The examples are for the Microsoft MakeCode Editor, which is also designed for beginners.

Features:

An easy-build entry-level robot kit that requires no soldering.

It contains detailed instructions for both the assembly and the coding.

The included cardboard body can easily be customised and decorated.

A great activity to do with supervised children.

It can be coded with the easy-to-use Microsoft MakeCode Editor, which the included instructions cover in detail.

Contents:

1 x Klip Motor Driver for BBC microbit.

2 x Wheels and Tyres.

1 x Set of Clip Leads.

2 x Right Angle Geared Hobby Motor.

1 x Solderless TT Motor Board.

1 x Ping Pong Ball.

1 x Rubber Band.

1 x Cardboard chassis net.

Compose a monophonic microbit musical masterpiece with the Kitronik :KLEF Piano for the BBC micro:bit. It features 15 capacitive touch pads, with 13 arranged as a single octave and 2 up down function buttons that can allow you to shift octaves.

:KLEF also features; an onboard amplifier circuit for extra 'more', an onboard speaker, and an onboard edge connector that the micro:bit slots into.

To use the Piano, the BBC micro:bit should be inserted firmly into the edge connector, either way around. If the Link Header is being used, the BBC micro:bit LED display should be facing the Piano keys. Kitronik has produced a MakeCode getting started guide which you can follow here.

Power is provided via a 5V micro USB connector. The board then produces a regulated 3.3V supply fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. This also powers the capacitive touch sensor IC and audio amplifier.

The potential uses for the :KLEF Piano for the BBC micro:bit doesn't have to be just musical in nature. You can use the piano keys to transmit from the micro:bit attached to the board to other micro:bits over radio. And if that other microbit happened to be inserted into a :MOVE mini... Piano remote control! You can even take control of the :MOVE minis ZIP LEDs!

Features:

Compose music using the micro:bit!

Learn to code and explore music at the same time.

Write code using the MakeCode, MicroPython, and Mu editors.

Use it as a control surface to trigger the sending of data via the microbits radio module.

Use it as a remote control for your Buggies/Robots.

It works with micro:bit V1 and micro:bit V2.

Dimensions:

Length: 100mm.

Width: 110mm.

PCB Thickness: 1.6mm.

Max Height (No micro:bit): 17.3mm.

Max Height (With micro:bit): 53.3mm.

Ring:bit expansion board: A simple PCB for the micro:bit. (1)Extends the micro bit’s 3 GPIO ports. (2)Convert the P0/P1/P2 port to the common GVS port. (3) loaded with 3 pieces of AAA batteries to drive the car or other accessories. Six Fun Cases In One micro bit kit: kids can build 6 shapes, including traffic lights, brick cars, temperature-controlled fans, smart desk lamps, wipers, and a trebuchet. Well-designed Assembly Instructions and Courses: these make the kids learn coding easily as well as how to build blocks in an interesting way. This micro bit kit includes almost 200 Pieces Bricks: In fact, children can use these rich building blocks to build more of their favorite shapes.