MeArm Robot Micro:bit Kit- Blue (with controller)

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard, it is easy to use these pins to connect additional components to the BBC micro:bit.

Note:BBC micro:bit is NOT included. This kit requires assembly.

Features:

Make 10 experiments included in the provided step-by-step tutorial book.

All parts are included to conduct the 10 experiments (listed below).

Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included).

Small Prototype Breadboard included for fast prototyping.

Contents:

1 x Mounting Plate.

1 x Potentiometer - Vertical Type (finger adjust) 100K.

1 x Finger Adjust Spindle.

2 x Plastic Spacer 10mm.

1 x Sticky Fixer for Battery Pack.

1 x Small Prototype Breadboard.

1 x Terminal Connector.

4 x Push Switch.

1 x Motor.

1 x Transistor.

2 x Red 5mm LED.

2 x Orange 5mm LED.

2 x Yellow 5mm LED.

2 x Green 5mm LED.

1 x RGB 5mm LED.

1 x Fan Blade.

5 x 2.2KΩ Resistor.

5 x 10KΩ Resistor.

5 x 47Ω Resistor.

1 x Edge Connector Breakout Board for BBC micro:bit.

10 x Male to Male Jumper Wires.

10 x Male to Female Jumper Wires.

1 x 470uF Electrolytic Capacitor.

1 x Piezo Element Buzzer.

4 x Pan Head M3 Machine Screw.

Depending on which booklet version your Inventors Kit shipped with, you will have one of the two following components;
-- 1 x Miniature LDR. For booklet versions pre V1.7.
-- 1 x Phototransistor. For booklet versions post V1.7.

Edison is a programmable robot designed to be a complete STEM teaching resource for coding and robotics education for students from 4 to 16 years of age. The Edison robot is a powerful, engaging tool for teaching children computational thinking and computer programming in a hands-on way. With more built-in sensors than any robot in its class as well as lights, sounds and autonomous behaviour capabilities, Edison makes true robotics education accessible to students of all ages.

Edison’s robotics capabilities can be unlocked with ease through simple barcode programs. Students can then progress their robotics, coding and STEM education journeys using Edison with three progressive programming languages. Older students can learn the fundamentals of coding as they progress from drag-and-drop icon-based programming all the way through to coding in a vertical text-based language.

Edison can also be used to build and invent as the programmable base for an incredible range of engineering and STEM projects thanks to Edison’s expandable robotics system which works with the EdCreate construction kit and any other LEGO brick compatible building system.

Teach children computational thinking and coding in a hands on and intuitive way.

Suitable for use with children from 4 - 16 years of age.

Edison can respond to light and sound.

It can also follow lines and avoid obstacles.

Each Edison can communicate with other Edison robots.

They can also be connected to other Edison robots and LEGO bricks.

Code Edison via the headphone output on your Desktop/Laptop/Tablet/Phone.

Contents: 1 x Edison Robot & 1 x EdComm Cable.

The EdCreate Edison robot creator’s kit is a 5-in-1 expansion pack construction system. Designed to work with the Edison robot, EdCreate enriches student's STEM education experience through interactive engineering and programming projects. The EdCreate Edison robot creator’s kit is a construction system consisting of 115 interlocking building blocks, pegs, gears, and other parts. The individual EdCreate pieces are designed with studs and holes which are compatible with Edison robots and any other LEGO brick compatible building system.

The EdCreate system can be used with Edison robots to complete five EdBuild projects: the EdTank, the EdDigger, the EdRoboClaw, the EdCrane, and the EdPrinter. EdCreate can also be used in a wide range of open-ended engineering, design and programming challenges. Open-ended projects, including the EdCreate EdChallenges, promote creative problem solving and give students opportunities to find STEM applications to real-world scenarios.

Features:

5-in-1 expansion pack for the Edison Robot.

115 interlocking building blocks, pegs, gears, and other parts.

Complete five EdBuild projects: the EdTank, the EdDigger, the EdRoboClaw, the EdCrane, and the EdPrinter.

Compatible with Edison robots and any other LEGO brick compatible building system.

Contents:

115 interlocking building blocks, pegs, gears, and other parts.

Requires:

1 x Edison Robot.

As shown at the JCT in-service days SG Education are delighted to bring MERGE to Irish schools and consumers. This product is suitable for a range of subjects and across all ages.

Optimise the engineering process with 3D objects your student can hold and share from anywhere. Learn, play, and create in augmented reality by holding and interacting with virtual objects. The Merge Cube is used by hundreds of schools to inspire and engage kids to explore math, science, anatomy, engineering and more. See all of our Cube games and apps. No need to pack up additional chargers, wires, or batteries. The durable and soft Cube is the perfect travel companion to entertain and teach on the go. With over 30 available apps (most of them are free), your kids can play for hours. Simply download and launch Cube apps onto your smartphone or tablet (see all compatible devices), point device at the Cube, and watch the Cube transform before your eyes.

Includes

1x Merge Holographic Cube

13x Free Apps

1x Device Stand

Access to the Merge Membership Program

Expand your STEM Programme with hands-on mixed reality tools - Broaden your STEM offerings with projects that use mixed reality technology to unlock new ways to learn, create, and share.

Hold and place 3D objects in the real world

Teach STEM concepts with simulations and 3D models

Students can upload and share their own 3D creations

This product comes with a initial three month license for the Merge Subscription. Free content is available outside of the subscription.