Daler-Rowney FW Acrylic Inks are acrylic-based, pigmented, water-resistant artists' inks with a high degree of lightfastness and intermixability. FW Acrylic Ink can be used straight out of the dropper or diluted to achieve the most subtle of tones.
Isomars Acrylic Inks are specially formulated and pigmented inks with high viscosity for Paper Board, Canvas, Fabric and Wood. Non-Toxic Multi-purpose, comprehensive colour mixing, ready for immediate use, waterproof when dry ,lightfast and permanent. Accurate and easy dispensing with droppers dilutable, versatile and easy to use Magic Colour is ideal for Designers, Airbrush Artists, Illustrators, Fine Artists and Craft and Hobbyists.
Liquitex Acrylic Ink 30ml Range is an ultra-fluid acrylic with lightfast, artist-quality pigments. No dyes & no fade, just pure, permanent colour. And like all acrylics, it dries quickly and permanently, with no smudging or bleeding when rewetted or layered.
Liquitex Airbrush Medium is specifically formulated to thin acrylic colours for airbrush application. Mixing colours with Airbrush Medium will ensure that the colours do not lose their flexibility, durability and adhesion. Airbrush nozzle size and spraying pressure (PSI) will determine the ratio of Airbrush Medium to paint mixture. Larger nozzles allow for greater amounts of paint in the mixture.
Keep airbrush wet during use, do not allow the paint to dry in airbrush. Clean airbrush with water, water/ammonia mixture, Liquitex Professional Acrylic Ink Pen Cleaner, airbrush cleaner or alcohol.
AIRBRUSH COMPRESSOR ARISM BY SPARMAX AC66-HX Lightweight but strong small compressor for easy transport. Since the compressor does not contain oil, transport in bags and suitcases is also unproblematic when travelling.
The compressor builds up its working pressure and stops automatically when its maximum pressure is reached. If air is removed from the compressor and the air pressure in the compressor falls below 25 PSI/1.7 bar, the compressor will start until it has reached its maximum pressure again.
The Sparmax ARISM compressor features:
Low maintenance, oil-lesssing lepiston air compressor
Working pressure from 0 psi to 35 psi
Auto on/off switch: 1.7/2.4 bar (25/35psi)
Airbrush bleed valve
Silver Bullet moisture trap
2M Braided hose
Airbrush holder
Detachable power cord ; plug
Pressure gauge
Air flow:13 - 15 lpm (0.46 - 0.53 cfm) at open flow
1/8BSPoutlet on compressor
Size: L19.2 x W12 x H18.5 cm (6.7" x 4.7" x 7.6")
Weight: 2.6 kgs (5.7 lbs)
Voltage: 220-240V 50Hz
Noise level: 49±dB
Duty cycle:40 minutes continuous use. After 40 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on.
The Sparmax ARISM compressor is suitable for these airbrushes and similar airbrushes, which have low air consumption:
Sparmax SP35 / SP35C
Sparmax MAX-3 / MAX-4
Sparmax HB-040
Iwata Custom Micron (with the air bleed valve open as the Micron has lower air consumption)
Iwata Kustom series(except K-TH)
Iwata HP-B, HP-B-Plus, HP-BH Hi-Line
Iwata HP-SB-Plus
Iwata HP-BC-Plus
Iwata HP-C, HP-C-Plus or HP-CH
Iwata Eclipse BS
Iwata Eclipse CS
Iwata Eclipse BCS
Iwata Revolution BR, M1
Iwata Revolution CR, M2
Iwata Revolution SAR, BCR
Neo for Iwata CN and BCN (with the air bleed valve open as the Neo has lower air consumption)
This versatile Spartan professional double action airbrush has many of the attributes of more expensive airbrushes but at a fraction of the cost. Ideal for beginners and seasoned professionals alike.
Comes fitted with 0.2mm nozzle and a 0.5cc gravity feed cup
A multi-purpose brush ideal for illustration, general graphics work, nail art and body art.
Simple, single-action trigger airbrush for general purpose hobby and model work. Variable pattern and paint flow is adjusted by the venturi nozzle. Can be powered by propellant canister or with a compressor if prolonged use is required.
1.6m air hose
2 x 22ml paint jars
Variable pattern & paint flow
1/4" BSP air line & canister adaptor
Case included
Box Contents
1 x Air hose (length 1500mm, diameter 4mm)
1 x Compressor air connector
1 x Compressor air flow adjuster cap
1 x Glass jar with plastic lid (50mm x 36mm)
1 x Glass jar with plastic lid and tube for paint extraction (63mm x 36mm)
Isomars Acrylic Inks are specially formulated and pigmented inks with high viscosity for Paper Board, Canvas, Fabric and Wood. Non-Toxic Multi-purpose, comprehensive color mixing, ready for immediate use, waterproof when dry ,lightfast and permanent.
Accurate and easy dispensing with droppers dilutable, versatile and easy to use Magic Color is ideal for Designers, Airbrush Artists, Illustrators, Fine Artists and Craft and Hobbyists.
€14.94
ih
Cookies help us deliver our services. By using our services, you agree to our use of cookies.