Search
All Categories
    Menu Close

    Kitronik Protector Case for Microbit - V1 &V2

    Manufacturer: Kitronik
    This Kitronik MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original Micro:bit V1and the new Micro:bit V2and continues in the traditions of our earlier cases. The cases are designed to keep the micro:bit safe, fully useable, and to offer the freedom of not being tethered to a computer.

    If a battery holder is attached to the back it can also can be stood neatly on a desk and it also features large and easy to read labels for the A and B buttons. This case provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for the BBC Micro:bit can be used. One of the key features of the micro:bit is its physical size and this case has been designed with that in mind. It's as compact as we could make it, whilst still offering protection for the micro:bit.

    The case is also supplied with a sticky fixer pad so that you can attach a battery holder to the rear of the case, such as can be found in our BBC micro:bit Starter Kit. When a battery holder is used, micro:bit projects can go wherever you go. Even with a battery holder attached, the case is still palm-sized and portable.

    Note: This case requires assembly, full instructions can be found in the resources section below.

    Features:
  • Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
  • Full access to the A and B buttons on the BBC micro:bit.
  • Attach a battery cage to the rear of the case with the supplied sticky fixer.
  • Full access to pins and connections including the micro USB connector.
  • Clear case material shows the on-board LEDs in perfect clarity.
  • The case is compatible with versions 1 and 2 of the micro:bit.
  • When used in conjunction with a battery holder, micro:bit projects can be fully mobile.

  • Contents:
  • 4 x M3 Cheese Head Nylon Machine Screw.
  • 1 x Sticky Fixer Pad.
  • 4 x M3 Nylon Full Nut.
  • Laser-cut parts;
    -- 1 x Back Mounting Plate.
    -- 2 x Mid-layer Parts.
    -- 1 x Mid-layer Plate.
    -- 1 x Front Plate.

  • Dimensions:
  • Length: 65mm.
  • Width: 37mm.
  • Depth (without screws): 12mm.
  • Depth (with screws): 18.5mm.

  • SKU: KI 56102
    Availability: 153 in stock
    €5.95
    i h
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Product Resources / Datasheet

    Products specifications
    MICRO:BIT
    Device TypeCases & Storage
    *
    *
    *
    Customers who bought this item also bought
    Picture of Micro:bit V2 GO

    Micro:bit V2 GO

    MIC 494
    With the micro:bit Go Bundle you have a complete set to get started coding right away. This bundle includes a micro:bit board, micro USB cable, battery holder and 2x AAA batteries.

    The BBC micro:bit is a pocket-sized computer that introduces you to how software and hardware work together. It has an LED light display, buttons, sensors and many input/output features that, when programmed, let it interact with you and your world. The new micro:bit V2.2 with sound adds a built-in microphone and speaker, as well as an extra touch input button and a power button.

    For more information please see below

    €22.95
    Picture of Kitronik MOVE Motor for Micro:bit

    Kitronik MOVE Motor for Micro:bit

    KI 5683
    Develop your coding skills with the Kitronik :MOVE Motor for micro:bit, a fun introduction to buggies and robotics. The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics. More than just a programmable buggy, learning to use all of the included features will give the budding roboteer a solid grounding in robotics as a whole.

    Learn about movement, how to utilise light and sound, obstacle detection and avoidance, and how to code :MOVE Motor to follow a line. When used in conjunction with the micro:bit's radio features, the possibilities are endless.

    Attached to the chassis are two bi-directional DC motors with variable speed control. The wheels have rubber tyres and are a simple push-fit onto the motor shafts. Slot a BBC micro:bit into the edge connector and you are ready to code. There is no other assembly required and no tools required.

    There are built-in battery holders for 4x AA batteries. This provides a regulated voltage supply to power the BBC micro:bit which is fed into the edge connector. There is also a power switch to conserve batteries when the buggy is not in use. The micro:bit slots into the onboard edge connector. Code the micro:bit, plug it into the buggy, switch the power on, and then play.

    Features:
  • The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics and coding.
  • It is backed up by a range of fun tutorials to introduce you to all of the great features.
  • All of the tutorials and resources are free.
  • There is no soldering required and assembly is quick and super simple.
  • The buggy features two bi-direction DC motors.
  • There are ultrasonic distance and line-following sensors onboard.
  • It also features a Piezo sounder and pen mount.
  • There are 4 full-colour programable ZIP LEDs.
  • Two-pin outputs that are ideal for servo connections (can be used for other inputs and outputs).
  • The battery holder is built onto the chassis.
  • The buggy is also fitted with a power switch to conserve the batteries.
  • There is also an onboard edge connector for the micro:bit, code, plug and play.
  • Kitronik has produced custom MakeCode blocks to simplify coding with the MakeCode editor
  • Kitronik have also created example MicroPython code in our GitHub repository. 

  • Contents:
  • 1 x :MOVE Motor chassis.
  • 2 x Wheel and tyres.
  • 1 x Booklet with some quick tutorials to get you started. There are also additional online tutorials and step-by-step guides for extra projects.

  • €47.95
    Picture of Kitronik Crocodile Leads Pack of 10

    Kitronik Crocodile Leads Pack of 10

    KI 2407
  • Pack of ten wires in a selection of five colours each with insulated crocodile clips on both ends.
  • Lead length 0.5m
  • Max current 0.5 Amp
  • €4.10
    Picture of SG Micro:bit V2 Project Kit

    SG Micro:bit V2 Project Kit

    SG CSKIT2
    Build up to six projects straight out of the box with this great value SG Education Project Kit for the BBC micro:bit. The perfect way to get started with programming and hardware interaction. No soldering required, all parts are included to build 6 projects. Small prototype breadboard and 2 x AAA Batteries are included.

    Included in the kit are:
    BBC Micro:Bit
    Mini Breadboard
    Shielded Croc Leads
    USB to mini USB cable
    Red-Green-Amber LED's
    Battery cage
    AAA batteries included

    The projects that can be built are:
    Dice
    Theremin
    Miniature Steady Hand Game
    Fruit Keyboard
    Traffic Light
    €25.50