Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close
    Picture of Kitronik Battery Cage 2xAAA with JST Connector

    Kitronik Battery Cage 2xAAA with JST Connector

    Manufacturer: Kitronik
    Be the first to review this product
    This 2xAAA Battery Cage with JST connector is compatible with the Igloo, PICAXE wearable module and the BBC micro:bit. Supplied with 145mm colour coded power leads and a JST connector at the end, this battery cage is light and features a M3 mounting hole in the centre so it can be attached to the back of BBC micro:bit cases. The JST connector easily plugs into the Igloo and BBC micro:bit to provide a portable power supply. Ideal in any project kit with a JST connector power supply interface.

    Features:
  • JST connector for easy power supply connections.
  • Holds 2 x AAA batteries.
  • Clips hold AAA batteries securely in place.
  • 145mm colour coded power leads and a JST connector.
  • Clip holder resistant to sudden impacts and vibrations.

    • Contents:
  • 1 x 2 x AAA Battery Cage with JST Connector.

    • Dimensions:
  • Length: 53mm.
  • Width: 25mm.
  • Height: 13mm.
    • SKU: KI 2271
    Availability: 50 in stock
    €1.75
    i h
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Products specifications
    MICRO:BIT
    Device TypeCables, Switches & Motors
    *
    *
    *
    Related products
    Picture of Kitronik 4xAA Covered Battery Holder with Switch & Leads

    Kitronik 4xAA Covered Battery Holder with Switch & Leads

    KI 2222
    4xAA Covered Battery Holder with built-in on/off power switch and leads. Supplied with 150mm colour coded flying leads. Features a sliding cover for easy access to battery compartment. Case is hard plastic and is resistant to sudden impacts and vibrations. Ideal in any project kit requiring AA battery power.

    Note: this product does not have the JST connector to connect to the micro:bit

    Features:
  • On/off power switch.
  • Holds 4 x AA batteries.
  • Sliding case for easy access.
  • 150mm colour coded flying leads
  • Case resistant to sudden impacts and vibrations.

    • Contents:
  • 1 x 4xAA Covered Battery Holder with Switch and Leads.

    • Dimensions:
  • Length: 68mm.
  • Width: 65mm.
  • Height: 19mm.

    • Compatible with:
  • Raspberry Pi Pico
  • Micro:Bit
    • €2.20
    Picture of Kitronik Battery Cage 3xAAA with JST Connector

    Kitronik Battery Cage 3xAAA with JST Connector

    KI 2273
    This 3 x AAA battery holder with power leads that terminate in a JST connector. The leads are colour coded and 150mm long. The holder also features two mounting holes so that the battery holder can be permanently mounted on a project or surface.

    This battery holder is ideal for any project that requires 4.5V of battery power delivered via a JST connection.

    Features:
  • Holds 3 x AAA Batteries.
  • Mounting holes allowing for permanent attachments to projects or surfaces.
  • 150mm colour coded leads with a JST connector.

    • Contents:
  • 1 x (3xAAA) Battery holder with JST connector.

    • Dimensions:
  • Length: 52.5mm.
  • Width: 37.5mm.
  • Height: 12mm.
    • €2.35
    Picture of Kitronik Polymer Lithium Ion Battery- LiPo (3.7V, 250mAh)

    Kitronik Polymer Lithium Ion Battery- LiPo (3.7V, 250mAh)

    KI 2227
    These 3.7V Polymer Lithium-Ion (LiPo) batteries provide a high power capacity in a very small lightweight package, making them ideal for many applications. They are often used in portable consumer products such as Bluetooth speakers and mobile phones. The batteries are supplied with 100mm leads terminated with a JST adapter cable.

    These Polymer Lithium batteries come with a built-in protection circuit that protects against; overvoltage, over current, over-discharge and also provides short circuit protection. When fully charged the battery will have a voltage of around 4.2V and when fully discharged the battery has a cut off voltage of 2.4V.

    These batteries do not have a hard protective case. You should take care when housing the batteries in your design to ensure they have sufficient mechanical protection to protect the battery from any possible damage. If a battery does become damaged (dented, bent, etc) then it should not be used. Lithium Polymer batteries require special charging circuits. Do not attempt to charge these with anything but a specialised Lithium Polymer charger.

    Features:
  • Built-in protection circuit to prevent overcharging or discharging.
  • Built-in short circuit protection circuit.
  • Robust power source under extreme conditions (-10 to 60C).
  • Leads terminated with a JST connector.

    • Dimensions:
  • Length: 29mm.
  • Width: 25.5mm.
  • Thickness: 4mm.
  • Wire Length: 100mm.

    • Caution:
  • These batteries are capable of delivering high current output. If using conductive thread, a short in the circuit (between thread) could create sparks and heat. We recommend using coin cell holders and batteries for wearable projects.
  • When removing the connector from a socket do not pull it out using the connecting wires as this can damage the connector.
  • Neither the battery nor its protection circuit are waterproof, and if being used in an environment where water contact is possible or likely then the battery should be further protected.

    • €5.74
    Picture of Kitronik PP3 Battery Clip Lead (Heavy Duty) Pack of 25

    Kitronik PP3 Battery Clip Lead (Heavy Duty) Pack of 25

    KI 2238-25
    This heavy duty PP3 battery clip lead has a hard case making it extremely durable. It also features pre-tinned colour coded 150mm flying leads, making for easy integration into your projects. This clip lead can easily be soldered directly to a board or connected to your project via terminal blocks.

    Features:
  • Heavy duty construction.
  • 150mm colour coded pre-tinned flying leads.
  • It features a standard PP3 connector.
  • The leads are suitable for soldered connections.
  • The leads are suitable for terminal block connections.

    • Contains:
  • 1 x heavy duty PP3 battery clip with 150mm colour coded flying leads.

    • Dimensions:
  • Leads: 150mm
    • €9.95
    Picture of Kitronik PP3 Battery Clip Lead Standard Pack of 25

    Kitronik PP3 Battery Clip Lead Standard Pack of 25

    KI 2257-25
    This is a standard duty PP3 clip lead with a soft case, similar to connectors found in many standard consumer electronics products.

    It also features pre-tinned colour coded 150mm flying leads, making for easy integration into your projects.

    This clip lead can easily be soldered directly to a board or connected to your project via terminal blocks.

    Features:
  • Standard duty construction.
  • 150mm colour coded pre-tinned flying leads.
  • It features a standard PP3 connector.
  • The leads are suitable for soldered connections.
  • The leads are suitable for terminal block connections.

    • Contains:
  • 1 x Standard duty PP3 battery clip with 150mm colour coded flying leads.

    • Dimensions:
  • Leads: 150mm
    • €7.50
    Customers who bought this item also bought
    Picture of Kitronik Standard Diffused LED 3mm Range

    Kitronik Standard Diffused LED 3mm Range

    KITRONIK 3MM LED-RANGE
    Standard Diffused LED 3mm single - choice of colours

  • Red (KI 3501) 3mm standard diffused LEDs have a forward voltage drop of 2.1V and at 20mA output 275mCd. They fit neatly into a 3mm holder and have a 60° viewing angle.
  • Green(KI 3502 ) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 35mCd.
  • Yellow(KI 3503) 3mm standard diffused LED with a viewing angle of 60°. Luminous intensity 125mCd.
  • White(KI 3564) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 700mCd.
  • Blue(KI 3565) 3mm Standard Diffused LED with a viewing angle of 60°. Luminous intensity 500mCd.

    • Compatible with:
  • Raspberry Pi Pico
  • Micro:Bit
    • €0.17
    Picture of Kitronik Flat Profile Tact Switch Buzzer

    Kitronik Flat Profile Tact Switch Buzzer

    KI 3420
  • A low profile Miniature PCB Mount TACT Switch.
  • Single pole normally open contact.
  • Max voltage = 24V DC.
  • Max current = 50mA. L 6, W 6, H 4.3 mm.
  • L 6, W 6, H 4.3 mm.
  • This part is found in the Kitronik Inventors Kit
    • €0.50
    Picture of Kitronik SPTS Toggle Switch

    Kitronik SPTS Toggle Switch

    KI 3425
    SPST standard toggle switch. Maximum current at 250V AC = 2A. Maximum current at 125V AC = 5A.

    Features:
  • Single pole single throw toggle switch.

    • Dimensions (Approx.):
  • Length: 13mm.
  • Body Width: 8mm.
  • Body Height: 9.5mm.
    • €1.21
    Picture of Kitronik Breadboard Breakout for Micro:bit

    Kitronik Breadboard Breakout for Micro:bit

    KI 5664
    The Breadboard breakout for the BBC micro:bit allows the user to plug a BBC microbit into a standard 2.54mm pitch breadboard. Two 11 way pin headers are used to make connections into the breadboard.

    The micro:bit slots into the edge connector on the top side of the PCB. No extra tools are required for installation. The front of the BBC micro:bit (the side with the LEDs) should be inserted facing the same side as the 3V pin.

    The edge connector has connections on only one side, so if the BBC micro:bit is inserted in reverse orientation, it will not work.

    The PCB is designed to plug across the middle slot of a breadboard, the same placement as an IC component.

    Features:
  • The microbit slots into the on-board edge connector.
  • This breakout board plugs straight across the middle slot of a standard 2.54mm pitch breadboard, just like an IC component.
  • The microbits pins are broken out to 2 x 11 way header pins.
  • Use jumper wires to connect from the header pins to the breadboard.
  • No tools or soldering required for installation.
  • microbit to breadboard prototyping made easy.

    • Contents:
  • 1 x Breadboard breakout for the BBC micro:bit.

    • Dimensions:
  • Length: 58.4mm.
  • Width: 12.8mm.
  • Height: 20.76.
  • Pin Pitch: 2.54mm

    • €6.25
    From the same category
    Picture of Soldering 9 Piece Kit

    Soldering 9 Piece Kit

    TSM 845318
  • 100W soldering gun for work on cables and sheet metal.
  • 30W soldering iron with fine-point tip for precision work.
  • For electronics, household and automotive wiring.
  • Includes soldering iron stand, positioning tool, resin flux, solder, de-soldering tool, spare tip for the soldering gun and fully adjustable clamping work stand with magnifying glass.
  • All supplied in robust carry case.
    • €84.95
    Picture of Duratool Electronics Tool 25 Piece Kit

    Duratool Electronics Tool 25 Piece Kit

    DUR D00029
    Ideal for technicians, a comprehensive electronics toolkit supplied within a handy zipped tool bag - external dimensions: 340 x 210 x 50mm.

    Kit Contents:
  • 20W/130W Soldering iron
  • Desoldering pump
  • Multimeter
  • 5" Long nose pliers
  • 5" Side cutters
  • Slotted precision screwdriver: 2.5 x 75mm
  • Phillips precision screwdriver: PH00 x 75mm
  • Slotted screwdrivers: 4 x 75, 5 x 75, 6 x 125mm
  • Phillips screwdrivers: PH0 x 75, PH1 x 75, PH2 x 125mm
  • Mains tester screwdriver
  • Wire stripper/cutter
  • 8pc Hex key set: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm
  • IC extractor
  • Tweezers
    • €58.95
    Picture of Soldering Iron Starter Kit

    Soldering Iron Starter Kit

    KI 26104
    Great value starter soldering iron kit. Everything you need to start soldering in one handy pack, including a 30W mains powered soldering iron.

    Contents:
  • 1 x 30W Soldering iron.
  • 1 x Safety stand.
  • 1 x Desoldering pump.
  • Lead free solder.

    • Watch this video below for an explanation of some of the components in the kit (please note: not all items in the video are included in this kit, see contents list for exact contents).
    €19.95
    Picture of Duratool Third-Hand Tool with Magnifying Glass

    Duratool Third-Hand Tool with Magnifying Glass

    DUR D03285
  • Adjustable joints for movement in all directions
  • Strong alligator clips hold work securely
  • Heavy, cast-iron base for added stability
  • Distortion-free magnifying glass
  • Holder to support a soldering iron
    • €10.99
    Picture of Kitronik LED Starter Kit

    Kitronik LED Starter Kit

    KI 2327
    The LED kit contains red, green & yellow LEDs in 3mm, 5mm and 10mm round sizes as well as some Colour Changing and Tri colour LEDs plus some 5mm LED panel mounting holders. 105 parts are supplied in a multiple compartment storage box.

    Features:
  • Large selection of LEDs.
  • 3mm, 5mm and 10mm Red LEDs.
  • 3mm, 5mm and 10mm Green LEDs.
  • 3mm, 5mm and 10mm Yellow LEDs.
  • 5mm LED holders.
  • Colour Changing LEDs.
  • Tri colour 5mm diffused LEDs.

    • Contents:
  • 10 x 3mm Red LEDs.
  • 10 x 5mm Red LEDs.
  • 5 x 10mm Red LEDs.
  • 10 x 3mm Green LEDs.
  • 10 x 5mm Green LEDs.
  • 5 x 10mm Green LEDs.
  • 10 x 3mm Yellow LEDs.
  • 10 x 5mm Yellow LEDs.
  • 5 x 10mm Yellow LEDs.
  • 10 x 5mm Panel Mount LED Clips.
  • 10 x Colour Changing 5mm LEDs.
  • 10 x Tri Colour 5mm LEDs.
  • 1 x LED Kit box.

    • Kit Box Dimensions:
  • Length: 174mm.
  • Width: 140mm.
  • Height: 32mm.

    • Compatible with:
  • Raspberry Pi Pico
  • Micro:Bit
    • €28.95
    Picture of Duratool Desoldering Pump

    Duratool Desoldering Pump

    DUR D03331
    The Plastic Desoldering Pump with PTFE Nozzle features a durable blue plastic body designed for efficient and reliable solder removal. The PTFE (polytetrafluoroethylene) nozzle provides excellent heat resistance and smooth operation, making it ideal for precision desoldering tasks.

    The pump is easy to use, with a comfortable grip and a powerful suction mechanism to effectively remove molten solder from circuit boards and electronic components. This essential tool is perfect for hobbyists, technicians, and professionals who require a dependable solution for desoldering needs.
    €2.95
    Picture of Kitronik Jumper Wires 20cm Male/Female Pack of 40

    Kitronik Jumper Wires 20cm Male/Female Pack of 40

    KI 4128-40
    These are 20cm long jumpers with male connectors on one end and female on the other. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header.

  • Male to Female connectors
  • Pack of 40 x M/F Jumpers (four of each colour)
  • Length: 20cm (approx)
    • €3.95
    Picture of Kitronik Quartz Clock Movement

    Kitronik Quartz Clock Movement

    KI 2801
    These high precision Quartz Clock Mechanisms are great if you want to make your own clock or for replacing faulty clock mechanisms and come with all required fixing hardware and hour, minute and second hands. They are accurate to within 30 seconds per month and run from one AA Battery which lasts over a year. The time is easily set or adjusted with the dial on the back of the unit.

    Popular uses include recycling old CDs and laser cutting custom designs from Perspex or plywood to make into clocks, but if you're after a more complete kit you can try our clock making kit, or assemble your own kit from our range of accessories.

    Features:
  • Quality quartz clock movement.
  • Includes hands and fixings.
  • Energy-efficient.
  • Accurate timekeeping.

    • Contents:
  • 1 x Quartz clock mechanism.
  • 1 x Second hand.
  • 1 x Minute hand.
  • 1 x Hour hand.
  • 1 x Washer.
  • 1 x Fixing nut.

    • Dimensions:
  • Width: 54mm
  • Height: 54mm
  • Depth: 14mm

    • €2.95
    Picture of Kitronik Jumper Wires 20cm Male/Male Pack of 40

    Kitronik Jumper Wires 20cm Male/Male Pack of 40

    KI 4110-40
    These are 20cm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header.

  • Male to Male connectors
  • 40 x M/M Jumpers (four of each colour)
  • Length: 20cm (approx)
    • €3.95
    Picture of Kitronik Timed Night Light Project Kit

    Kitronik Timed Night Light Project Kit

    KI 2139
    The colour changing LED on this kit turns on when it goes dark and stays on for a period of time. This makes a good night light and because the LED is only on for a small amount of time the batteries last much longer than a light that is on all night.

    There is an on board trimmer to set the light level at which the LED turns on and another trimmer to set how long the LED stays on for. The maximum duration is about 30 minutes. When set to 15 minutes and activated once a night the batteries will last two months.

    Features:
  • Adjustable light level sensor.
  • Adjustable length of light time.

    • Contents:
  • 2 x 10K Resistor.
  • 2 x 1M Resistor.
  • 1 x PCB trimmer 220K POT.
  • 1 x PCB trimmer 10M POT.
  • 1 x 47R Resistor.
  • 1 x Miniature LDR.
  • 1 x Capacitor, Electrolytic, 16V, 470uF.
  • 4 x 2N7000 N Chanel FET.
  • 1 x Colour Changing 5mm Diffused LED - 750mCd.
  • 1 x PP3 Battery Clip Lead (Heavy Duty).
  • 1 x 3xAA Battery Cage with Clip.
  • 1 x Timed Night Light Kit PCB.

    • Dimensions:
  • PCB Length: 53mm.
  • PCB Width: 41mm.


    • Requires:
  • 3 x AA Batteries.
  • Soldering Iron.
  • Solder.
  • Wire Cutters.
    • €6.35
    Information
    My account
    Customer service

    Payment options

    Powered by nopCommerce
    Copyright © 2024 SG Education Online. All rights reserved.